EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 559 (2024) E3S Web of Conf., 559 (2024) 02009 References
Open Access
Issue
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
Article Number 02009
Number of page(s) 13
Section Mechanical Engineering
DOI https://doi.org/10.1051/e3sconf/202455902009
Published online 08 August 2024
  1. S. K. Mahapatra, A. Satapathy, Development and characterization of titanium oxide filled ramie fiber based hybrid composites. Polym Compos. 44, (2023). [Google Scholar]
  2. A.S.J. Al-Zubaydi, R.M. Salih, B.M. Al-Dabbagh, Effect of nano TiO2 particles on the properties of carbon fiber-epoxy composites. Progress in Rubber, Plastics and Recycling Technology. 37, (2021). [Google Scholar]
  3. G. Vijayasekaran, M. Kamal, M. Gopi, S. Nanthakumar, R. Girimurugan, Enhancement of natural fiber-reinforced plastics by polyester and seaweed waste fibers. Materials Today: Proceedings. (2023). [Google Scholar]
  4. S. Thipperudrappa, A. Hiremath, B. Kurki Nagaraj, Synergistic effect of ZnO and TiO2 nanoparticles on the thermal stability and mechanical properties of glass fiber‐reinforced LY556 epoxy composites. Polymer Composites. 42, (2021). [Google Scholar]
  5. L. Ma, Y. Zhu, X. Li, C. Yang, P. Han, G. Song, the architecture of carbon fiber-TiO2 nanorods hybrid structure in supercritical water for reinforcing interfacial and impact properties of CF/epoxy composites. Polymer Testing. 66, (2018). [Google Scholar]
  6. F. Hanan, M. Jawaid, M.T. Paridah, J. Naveen, Characterization of hybrid oil palm empty fruit bunch/woven kenaf fabric-reinforced epoxy composites. Polymers. 12, (2020). [Google Scholar]
  7. B. Babu, P. Muruganandhan, R. Girimurugan, S. Sakthi, S. Nanthakumar, S. Vignesh, Influence of powdered chick eggshell (PECS) on mechanical and wear properties of kenaf fiber (KF) reinforced composites. Materials Today: Proceedings. (2023). [Google Scholar]
  8. S. Mayakannan, R. Rathinam, R. Saminathan, R. Deepalakshmi, M. Gopal, J. Hillary, S. Nanthakumar, V.Y. Ganvir, P. Singh, Analysis of Spectroscopic, Morphological Characterization and Interaction of Dye Molecules for the Surface Modification of TiB2 Nanoparticles. Journal of Nanomaterials. (2022). [Google Scholar]
  9. S. Ganesh, S. Keerthiveettil Ramakrishnan, V. Palani, M. Sundaram, N. Sankaranarayanan, S.P. Ganesan, Investigation on the mechanical properties of ramie/kenaf fibers under various parameters using GRA and TOPSIS methods. Polymer Composites, 43, (2022). [Google Scholar]
  10. R. Girimurugan, M. Vairavel, A. Anandha Moorthy, E. Prakash, S. Madheswaran, Experimental Studies on Mechanical Behaviour of Polylactide (PLA) Matrix—Aluminium Oxide (Al2O3) Particles Reinforced Composites, In Advances in Materials Research Select Proceedings of ICAMR, Springer, Singapore, (2021). [Google Scholar]
  11. Prasad, Vishnu, M. A. Joseph, K. Sekar. Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition. Composites part A: Applied science and manufacturing. 115, (2018). [Google Scholar]
  12. N. Chethan, S.N. Nagesh, L.S. Babu, Mechanical behaviour of kenaf-jute-E-glass reinforced hybrid polymer composites. Materials Today: Proceedings. 46, (2021). [Google Scholar]
  13. V. Jaiganesh, K. Senthilnathan, T. Kumarasan, R. Saravanan, S. Nanthakumar, R. Girimurugan, Influence of fibre on mechanical behavior of Ramie fibre/polystyrene hybrid composite. Materials Today: Proceedings. (2023). [Google Scholar]
  14. G. Magesh, R. Elansezhian, Synthesis on mechanical properties of newly developed polymer matrix hybrid nano composite. in Materials Today: Proceedings. 51, (2021). [Google Scholar]
  15. N.A. Aprilia, M.S. Atiqah, Z. Ismail, C.Y. Loo, C.K. Saurabh, R. Dungani, H.P. Khalil, Supercritical carbon dioxide treated kenaf bast pulp fiber reinforcement in epoxy composite. Journal of Renewable Materials. 5, (2017). [Google Scholar]
  16. A.S.I. Ahmad Safwan Ismail, M.J. Mohammad Jawaid, M.T.H. Sultan, A.H. Azman Hassan, Physical and mechanical properties of woven kenaf/bamboo fiber mat reinforced epoxy hybrid composites. Bioresources. 14, (2019). [Google Scholar]
  17. R.G.C. Thiruvasagam, M. Selvaraj, S. Saravanan, M. Vairavel, R. Girimurugan. Art of review-fiber reinforced polymer composites. Journal of Information and Computing Science. 9, (2019). [Google Scholar]
  18. L. Natrayan, G. Janardhan, P. Paramasivam, S. Dhanasekaran, enhancing mechanical performance of TiO2 filler with Kevlar/epoxy-based hybrid composites in a cryogenic environment: a statistical optimization study using RSM and ANN methods. Front Mater. 10, 2023. [CrossRef] [Google Scholar]
  19. S.M. Nur, M.H. Parveg, S. Ahmed, N.R. Dhar, Experimentation on Enhancing Mechanical Characteristics of E-glass Fiber-Strengthened Epoxy Resins with Fillers. Journal of The Institution of Engineers (India): Series D. 103, (2022). [Google Scholar]
  20. T. Setyayunita, R. Widyorini, S.N. Marsoem, D. Irawati, Effect of different conditions of sodium chloride treatment on the characteristics of kenaf fiber-epoxy composite board. Journal of the Korean Wood Science and Technology. 50, (2022). [Google Scholar]
  21. R. Girimurugan, N. Senniangiri, B.P. Krishnan, S. Kavitha, M. Vairavel, Tensile behaviour of hybrid polymer composites–an experimental study. In IOP Conference Series: Materials Science and Engineering. 1059, (2021). [Google Scholar]
  22. V. Prasad, M.A. Joseph, K. Sekar, M. Ali, Flexural and impact properties of flax fibre reinforced epoxy composite with nano TiO2 addition. Materials Today: Proceedings. 5, (2018). [Google Scholar]
  23. A. Devadas, U. Nirmal, J. Hossen, Investigation into mechanical & tribological performance of kenaf fibre particle reinforced composite. Cogent Engineering. 5, (2018). [Google Scholar]
  24. P. Muruganandhan, S. Jothilakshmi, R. Vivek, S. Nanthakumar, S. Sakthi, S. Mayakannan, R. Girimurugan, Investigation on silane modification and interfacial UV aging of flax fibre reinforced with polystyrene composite. Materials Today: Proceedings. (2023). [Google Scholar]
  25. N. Shahidan, M.B. Bakar, M.N. Masri, M. Mazlan, N.Z. Noriman, S.D. Omar, M.U. Umar, the effect of titanium dioxide to enhance physical properties of coconut shell reinforced unsaturated polyester composites. In AIP Conference Proceedings. 2213, (2020). [Google Scholar]
  26. S.W. Ghori, G.S. Rao, A.A. Rajhi, Investigation of physical, mechanical properties of treated date palm fibre and kenaf fibre reinforced epoxy hybrid composites. Journal of Natural Fibers. 20, (2023). [CrossRef] [Google Scholar]
  27. P. Ponnusamy, L. Girisha, S. Balamurugan, A. Benham, R. Vivek, G.B. Loganathan, R. Girimurugan, Investigation on the thermal properties of carbon fibres with silica-based aerogel composites. In Journal of Physics: Conference Series. 2603, (2023). [Google Scholar]
  28. R.S. Kumar, V.V. Devi, D.M. Nivedhitha, S.S. Satya, S. Visakan, S.B. Sharma, S.S. Kumar, Effect of nanoparticles in natural fiber reinforced polymer composites. Materials Today: Proceedings. (2023). [Google Scholar]
  29. S. Roy, Comparative analysis of thermo-physical and mechanical properties of PALF/CF/epoxy resin with and without nano TiO2 filler. J Mech Behav Biomed Mater. 148, (2023). [Google Scholar]
  30. K.V. Gopal, K.R.V. Kumar, G. Suresh, V. Rajasekharan, P.K. Nagarajan, C.M. Meenakshi, Investigation of TiO2 Nano Filler in Mechanical, Thermal Behaviour of Sisal/Jute Fiber Reinforced Interpenetrating Polymer Network (IPN) Composites. Materials Research. 25, (2022). [CrossRef] [Google Scholar]
  31. R. Girimurugan, B. Babu, R. Saravanan, M. Vigneshwaran, S. Mehanathan, Effect of kapok seed powder on mechanical and water intake properties of untreated kenaf fiber composites. Materials Today: Proceedings. (2023). [Google Scholar]
  32. T. Sathish, J. Giri, I. Albaijan, Investigation into improved characteristics of nanocomposites of kenaf and basalt fibers strengthened with titanium oxide nanoparticles. AIP Advances. 14, (2024). [Google Scholar]
  33. H. Sosiati, M. Fahmi Rozi, C. Budiyantoro, H. Sinin, Comparative study of epoxy composites reinforced with kenaf fiber and different types of microparticles. Key Engineering Materials. 918, (2022). [Google Scholar]
  34. W.H. Wan Badaruzzaman, N.M.R. Dabbagh, K.M. Salleh, E.N. Saharuddin, N.F. Mat Radzi, M.A.A. Azham, S.F. Abdullah Sani, S. Zakaria, Mechanical properties and water absorption capacity of hybrid GFRP composites. Polymers. 14, (2022). [Google Scholar]
  35. R. Girimurugan, J. Bensam Raj, Nano materials with fiber reinforced polylactic acid matrix composite: a review. Solid State Technology. 63, (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.