EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 559 (2024) E3S Web of Conf., 559 (2024) 04013 References
Open Access
Issue
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
Article Number 04013
Number of page(s) 11
Section Structural Engineering & Concrete Technology
DOI https://doi.org/10.1051/e3sconf/202455904013
Published online 08 August 2024
  1. M. Mucha, P. Mróz, A. Kocemba, Polymer composites based on gypsum matrix, in: AIP Conference Proceedings, American Institute of Physics Inc., 2016: p. 020119. https://doi.org/10.1063/1.4949694. [Google Scholar]
  2. Q.L. Yu, H.J.H. Brouwers, Microstructure and mechanical properties of β- hemihydrate produced gypsum: An insight from its hydration process, Construction and Building Materials. 25 (2011) 3149–3157. https://doi.org/10.1016/j.conbuildmat.2010.12.005. [CrossRef] [Google Scholar]
  3. S.A. Yıldızel, S. Çarbaş, Mechanical performance comparison of glass and mono fibers added gypsum composites, Challenge Journal of Structural Mechanics. 4 (2018) 9. https://doi.org/10.20528/cjsmec.2018.01.002. [CrossRef] [Google Scholar]
  4. M.E.E. Sanad, E.C. Combe, A.A. Grant, The Use of Additives to Improve the Mechanical Properties of Gypsum Products, Journal of Dental Research. 61 (1982) 808–810. https://doi.org/10.1177/00220345820610063201. [CrossRef] [PubMed] [Google Scholar]
  5. A. Papageorgiou, G. Tzouvalas, S. Tsimas, Use of inorganic setting retarders in cement industry, Cement and Concrete Composites. 27 (2005) 183–189. https://doi.org/10.1016/j.cemconcomp.2004.02.005. [CrossRef] [Google Scholar]
  6. M. Murat, A. Attari, Modification of some physical properties of gypsum plaster by addition of clay minerals, Cement and Concrete Research. 21 (1991) 378–387. https://doi.org/10.1016/0008-8846(91)90019-E. [CrossRef] [Google Scholar]
  7. R.C. Joshi, J.O. Thomas, R.B. Adam, Properties of Gypsum Wallboards Containing Fly Ash, Journal of Materials in Civil Engineering. 4 (1992) 212–225. https://doi.org/10.1061/(asce)0899-1561(1992)4:2(212). [CrossRef] [Google Scholar]
  8. A. Bentur, K. Kovler, A. Goldman, Gypsum of improved performance using blends with Portland cement and silica fume, Advances in Cement Research. 6 (1994) 109–116. https://doi.org/10.1680/adcr.1994.6.23.109. [CrossRef] [Google Scholar]
  9. Y. Deng, T. Furuno, T. Uehara, Improvement on the properties of gypsum particleboard by adding cement, Journal of Wood Science. 44 (1998) 98–102. https://doi.org/10.1007/BF00526252. [CrossRef] [Google Scholar]
  10. F.S. Abbas, W.S. Abdulkareem, M.N. Abbas, STRENGTH DEVELOPMENT OF PLAIN CONCRETE SLABS BY THE SUSTAINABILITY POTENTIAL OF LEAD-LOADED RICE HUSK (LLRH), Journal of Applied Engineering Science. 20 (2022) 160–167. https://doi.org/10.5937/jaes0-32253. [Google Scholar]
  11. F. Hernández-Olivares, M.R. Bollati, M. Del Rio, B. Parga-Landa, Development of cork-gypsum composites for building applications, Construction and Building Materials. 13 (1999) 179–186. https://doi.org/10.1016/S0950-0618(99)00021-5. [CrossRef] [Google Scholar]
  12. A.S.D. Al-ridha, A.A. Abbood, H.H. Hussein, Improvement of Gypsum Properties Using S.F. Additive, (International Journal of Science and Research ( IJSR. 6 (2017) 504–509. https://doi.org/10.21275/ART20175774. [Google Scholar]
  13. A.A. Abbood, Improvement of Gypsum Characteristics Using T.G.P. and P.V.A. Additives, ( International Journal of Science and Research ( IJSR. 7 (2018) 741–747. https://doi.org/10.21275/ART20179775. [Google Scholar]
  14. A.S.D. AL-Ridha, A.A. Abbood, A.F. Atshan, H.H. Hussein, L.S. Dheyab, M.S. Mohialdeen, H.Z. Ali, A Comparative Study Between the Individual, Dual and Triple Addition of (S.F.), (T.G.P.) and (P.V.A.) for Improving Local Gypsum (Juss) Properties, in: Sustainable Civil Infrastructures, Springer Science and Business Media B.V., 2020: pp. 65–79. https://doi.org/10.1007/978-3-030-34249-4_7. [Google Scholar]
  15. A. Dhaheer, S. Mohammed, H.K. Ammash, K.K. Hameed, Improvement of ordinary and pure gypsum properties by using polyvinyl alcohol (PVA), International Journal of Civil Engineering and Technology. 9 (2018) 323–334. [Google Scholar]
  16. A.S.D. AL-Ridha, A.A. Abbood, Y.M. Al-Badran, H.H. Hussein, L.S. Dheyab, A.F. Atshan, I.D. Khudhur, M.R. Alak, A.A. Ahmed, Comparative study between the individual, dual and triple addition of (SF), (TGP) and (PVA) for improving Local Plaster of Paris (LPOP) properties, Materials Today: Proceedings. 56 (2022) 2721–2729. https://doi.org/10.1016/j.matpr.2021.09.401. [CrossRef] [Google Scholar]
  17. A.A. Abbood, A.F. Atshan, A.S.D. AL-Ridha, Improvement of local gypsum plaster setting time by the combined usage of (TGP) and (PVA) additives., in: IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, 2020: p. 012106. https://doi.org/10.1088/1757-899X/870/1/012106. [Google Scholar]
  18. A.S.D. Al-Ridha, A.A. Abbood, E.H. Elaiwi, H.H. Hussein, L.S. Dheyab, Increasing the Setting Time of Local Gypsum (Joss) by the Use of TGP additive, in: IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, 2020: p. 012078. https://doi.org/10.1088/1757-899X/888/1/012078. [Google Scholar]
  19. E.H. Elaiwi, A.K. Ibrahim, S.F. Al-Chalabi, A.A. Abbood, F.M. Hussein, H.H. Hussein, A.S.D. AL-Ridha, The influence of water-gypsum ratio on the properties of national gypsum (Jοss) for various additives, Materials Today: Proceedings. 80 (2023) 1327–1333. https://doi.org/10.1016/J.MATPR.2023.01.081. [CrossRef] [Google Scholar]
  20. S.F. Al-Chalabi, E.H. Elaiwi, F.M. Hussein, A.A. Abbood, S.K. Ibrahim, H.H. Hussein, F.S. Abbas, E.L.N. Abdullah, E.Z.A. Shukri, A.S.D. AL-Ridha, Evaluating the individual, dual usage of (TGP) and (SF) additives on improving gypsum characteristics, Materials Today: Proceedings. 62 (2022) 4567–4573. https://doi.org/10.1016/j.matpr.2022.05.305. [CrossRef] [Google Scholar]
  21. M. Singh, M. Garg, Glass fibre reinforced water-resistant gypsum-based composites, Cement and Concrete Composites. 14 (1992) 23–32. https://doi.org/10.1016/0958-9465(92)90036-U. [CrossRef] [Google Scholar]
  22. G. Li, Y. Yu, Z. Zhao, J. Li, C. Li, Properties study of cotton stalk fiber/gypsum composite, Cement and Concrete Research. 33 (2003) 43–46. https://doi.org/10.1016/S0008-8846(02)00915-8. [CrossRef] [Google Scholar]
  23. N. Flores Medina, M.M. Barbero-Barrera, Mechanical and physical enhancement of gypsum composites through a synergic work of polypropylene fiber and recycled isostatic graphite filler, Construction and Building Materials. 131 (2017) 165–177. https://doi.org/10.1016/j.conbuildmat.2016.11.073. [CrossRef] [Google Scholar]
  24. Y.-F. Wu, M.P. Dare, Flexural and Shear Strength of Composite Lintels in Glass-Fiber-Reinforced Gypsum Wall Constructions, Journal of Materials in Civil Engineering. 18 (2006) 415–423. https://doi.org/10.1061/(asce)0899-1561(2006)18:3(415). [CrossRef] [Google Scholar]
  25. A.S.D. Al-Ridha, A.A. Abbood, L.S.M. Al-Asadi, H.H. Hussein, L.S. Dheyab, Effect of Adding Chopped Carbon Fiber (CCF) on the Improvement of Gypsum Plaster Characteristicssss, in: IOP Conference Series: Materials Science and Engineering, IOP Publishing Ltd, 2020: p. 012009. https://doi.org/10.1088/1757-899X/988/1/012009. [Google Scholar]
  26. M. Abid Jameel, L.S.M. Al-Asadi, Z. Abd Hacheem, A.S.D. AL-Ridha, Effect of Chopped Carbon Fibre (CCF) on enhancing the compressive strength and density of gypsum plaster, Materials Today: Proceedings. 62 (2022) 4539–4544. https://doi.org/10.1016/J.MATPR.2022.05.108. [CrossRef] [Google Scholar]
  27. A.S.D. AL-Ridha, F.S. Abbas, H.A.M. Faris, L.S. Dheyab, H.Z. Ali, M.S. Mohialdeen, THE INFLUENCE OF CHOPPED COPPER FIBRE (CF) ON THE IMPROVEMENT OF PURE GYPSUM BY COMPRESSIVE STRENGTH, Journal of Applied Engineering Science. 20 (2022) 546–551. https://doi.org/10.5937/jaes0-33435. [CrossRef] [Google Scholar]
  28. A.S.D. Al-Ridha, A.A. Abbood, F.M. Hussein, L.S. Dheyab, E.L.N. Abdullah, E.H.Z. Ali, E.M.S. Mohialdeen, E.A.A. Abdulhussein, Effect of Chopped Sisal fiber (CSF) on enhancing the compressive strength of Local Plaster of Paris (LPOP), in: Materials Today: Proceedings, Elsevier Ltd, 2021: pp. 2575–2579. https://doi.org/10.1016/j.matpr.2021.05.063. [Google Scholar]
  29. A.N. Shubber, F.S. Abbas, H.M. AL-Taweel, S.K. Ibrahim, A. Al-Balhawi, Y.M. Al-Badran, L.S. Dheyab, A.S.D. Al-Ridha, The Evaluation Effect of Copper Fibre Diameter on Enhancing Compressive Strength of Pure Gypsum, Journal of Ecological Engineering. 24 (2023) 148–154. https://doi.org/10.12911/22998993/171293. [CrossRef] [Google Scholar]
  30. F.M. Hussein, Effect of chopped carbon fibers (CCF) and water to gypsum ratio on the compressive strength and density of gypsum plaster, AIP Conference Proceedings. 2917 (2023). https://doi.org/10.1063/5.0175848/2919380. [Google Scholar]
  31. S.K. Ibrahim, A. Aljubory, N.H. Jassem, Z.A. Hacheem, K.R. Gubashi, M.A. Jameel, E.H.Z. Ali, E.M.S. Mohialdeen, E.M.R. Alak, A.S.D. AL-Ridha, Influence of steel fiber (SF) addition on the enhancement compressive strength of pure gypsum, Materials Today: Proceedings. (2023). https://doi.org/10.1016/J.MATPR.2023.11.119. [Google Scholar]
  32. A.S.D. Al-Ridha, A.K. Ibrahim, H.M. Al-Taweel, L.S. Dheyab, Effect of Steel Fiber on Ultrasonic Pulse Velocity and Mechanical Properties of Self-Compact Light Weight Concrete, in: IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, 2019: p. 022017. https://doi.org/10.1088/1757-899X/518/2/022017. [Google Scholar]
  33. F. Luma H., Residual Compressive and Flexural Strength of Self\rCompacting Concrete Exposed to High Temperature, 14 (2010) 149–167. [Google Scholar]
  34. A. Lecturer, L. Abudel, Effect of Steel Fiber and Silica Fume on Hardened Concrete Compressive and Flexural strength, Journal of Engineering and Development. 19 (2015) 68–86. [Google Scholar]
  35. A.S. AL-Ridha, the Influence of Size of Lightweight Aggregate on the Mechanical Properties of Self-Compacting Concrete With and Without Steel Fiber, Int. J. Struct. & Civil Engg. Res. 3 (2014) 54–68. www.ijscer.com. [Google Scholar]
  36. A.S.D. Al-Ridha, A.A. Abbood, S.F. Al-Chalabi, A.M. Aziz, L.S. Dheyab, A Comparative Study Between the Effect of Steel Fiber on Ultrasonic Pulse Velocity (UPV) in Light and Normal Weight Self-Compacting Concretes, in: IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, 2020: p. 012081. https://doi.org/10.1088/1757-899X/888/1/012081. [Google Scholar]
  37. A.S.D. Al-Ridha, A.A. Abbood, A.F. Atshan, Assessment of the Effect of Replacing Normal Aggregate by Porcelinite on the Behaviour of Layered Steel Fibrous Self-Compacting Reinforced Concrete Slabs under Uniform Load, Journal of Engineering (United Kingdom). 2020 (2020). https://doi.org/10.1155/2020/3650363. [Google Scholar]
  38. et al. Al-Ridha, A. S., Influence of Fibrous Layers on the Behavior of SelfCompacting Light-weight Reinforced Concrete (SCLRC) Slabs under Area Load, Advances in Civil Engineering Materials. (2024). [Google Scholar]
  39. S.K. AL-Ridha, Ahmed S. D., Hameed, Atheer Naji, Ibrahim, Effect of steel Fiber on the Performance of Hot Mix Asphalt with Different Temperaturesand Compaction, Australian Journal of Basic and Applied Sciences. 8 (2014) 123–132. [Google Scholar]
  40. A.S.D. AL-Ridha, S.K. Ibrahim, E.L.S. Dheyab, Steel Fiber Effect on the Behavior of Hot Mixture Asphalt with Variable Asphalt Content, International Journal of Advanced Technology in Engineering and Science. 4 (2016) 204–213. [Google Scholar]
  41. S. ZAl-Sarraf, I.A. S Al-Shaarbaf, D.S. Diab, Effect of Steel Fiber on The Behavior of Deep Beams With and Without Web Opening, 2011. https://uotechnology.edu.iq/tec_magaz/volum292011/No.1.2011/text/Text(1).pdf (accessed September 24, 2022). [Google Scholar]
  42. S.L.A.-A. Elaiwi, EH; Al-Chalabi, Evaluating the performance of fibrous cement mortar containing chopped carbon fiber (CCF), IOP Conference Series: Materials Science and Engineering. (2020). https://iopscience.iop.org/article/10.1088/1757-899X/988/1/012041/meta (accessed September 24, 2022). [Google Scholar]
  43. A. AL-Ridha, E. Abuzaid, A.A. And, Effect of Addition of Chopped Carbon Fiber on the Behavior of Reinforced Concrete Beams With Variable (Shear Distance To Effective Depth ) Ratios., Journal of Engineering and Sustainable Development. 2018 (2018) 137–148. https://doi.org/10.31272/jeasd.2018.1.11. [CrossRef] [Google Scholar]
  44. Al-Ridha, Ahmed SD, et al. “Influence of Fibrous Layers on the Behavior of Self-Compacting Light-weight Reinforced Concrete (SCLRC) Slabs under Area Load.” Advances in Civil Engineering Materials 13.1 (2024): DOI: 10.1520/ACEM20230130 [Google Scholar]
  45. P. Kittl, E. Galleguillos, G. Diaz, Properties of compacted copper fibre reinforced cement composite, International Journal of Cement Composites and Lightweight Concrete. 7 (1985) 193–197. https://doi.org/10.1016/0262-5075(85)90007-7. [CrossRef] [Google Scholar]
  46. F.P. (Ferdinand P. Beer, E.R. (Elwood R. Johnston, J.T. DeWolf, D.F. (David F. Mazurek, Statics and mechanics of materials, McGraw-Hill, 2011. https://www.mheducation.com/highered/product/statics-mechanics-materials-beer-johnston/M9781260226751.toc.html (accessed September 25, 2022). [Google Scholar]
  47. A.S.D. AL-Ridha, A.F. Atshan, H.H. Hussein, A.A. Abbood, L.S. Dheyab, A.M. Alshaikh Faqri, Evaluation of Tensile Strength and Durability of Microbial Cement Mortar, Sustainable Civil Infrastructures. (2020) 80–89. https://doi.org/10.1007/978-3-030-34249-4_8/COVER. [Google Scholar]
  48. A.S.D. Al-Ridha, A.F. Atshan, K.S. Mahmoud, Q.K. Hameed, Effect of strengthening of steel beams with variable length by using carbon fiber, Journal of Engineering (United Kingdom). 2019 (2019). https://doi.org/10.1155/2019/1631692. [Google Scholar]
  49. A.S.D. Al-Ridha, Q.K. Hameed, A.F. Atshan, A.A. Abbood, L.S. Dheyab, Evaluation of Strengthening Steel Beams Using the Technique of Carbon Fiber Confinement by a Steel Plate (CFCSP), Advances in Civil Engineering Materials. 9 (2020) 53–66. https://doi.org/10.1520/ACEM20190164. [CrossRef] [Google Scholar]
  50. A.S.D. AL-Ridha, A.A. Abbood, A.F. Atshan, Evaluating the Efficiency of Strengthening Hot-Rolled I-Sectioned Steel Beams by using Additional Plates and Inclined Stiffeners with Various Widths, IOP Conference Series: Materials Science and Engineering. 870 (2020). https://doi.org/10.1088/1757-899X/870/1/012102. [Google Scholar]
  51. A. Al-Balhawi, A. Nadhom Shubber, L.S.M. Al-Asadi, S. Khaleel Ibrahim, Z. Abd Hacheem, N. Habib Jassem, L. Sahib Dheyab, A.S.D. AL-Ridha, Assessing the structural behavior of steel beams strengthening with additional plates, Materials Today: Proceedings. 62 (2022) 4562–4566. https://doi.org/10.1016/J.MATPR.2022.05.304. [CrossRef] [Google Scholar]
  52. L.F. Hussein, F.S. Abbas, A. Al-Balhawi, A.S.D. AL-Ridha, H.H. Hussein, Investigating the elastic and plastic behavior of I-steel beams by using carbon fiber laminates, Materials Today: Proceedings. 56 (2022) 2714–2720. https://doi.org/10.1016/j.matpr.2021.09.396. [CrossRef] [Google Scholar]
  53. A.S.D. Al-Ridha, K.S. Mahmoud, A.F. Atshan, Effect of carbon fiber reinforced polymer (CFRP) laminates on behaviour of flexural strength of steel beams with and without end anchorage plates, Materials Today: Proceedings. 49 (2022) 2778–2785. https://doi.org/10.1016/J.MATPR.2021.09.313. [CrossRef] [Google Scholar]
  54. ASTM C472-99, Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete, ASTM International. (2014). https://standards.globalspec.com/std/939628/astm-c472 (accessed September 24, 2022). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.