Open Access
Issue |
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
|
|
---|---|---|
Article Number | 04014 | |
Number of page(s) | 13 | |
Section | Structural Engineering & Concrete Technology | |
DOI | https://doi.org/10.1051/e3sconf/202455904014 | |
Published online | 08 August 2024 |
- Mucha M., Mróz P, Kocemba A. Polymer composites based on gypsum matrix. In VIII International Conference on “Times of Polymers and Composites”, American Institute of Physics, (2016). Cited by reference [14]. [Google Scholar]
- Yu Q, HJ Brouwers. Microstructure and mechanical properties of b-hemihydrate produced gypsum: An insight from its hydration process. Construction and Building Materials. (2011); 25: 3149–3157. Cited by reference [14]. [CrossRef] [Google Scholar]
- Yıldızel S and Çarbaş S. Mechanical performance comparison of glass and mono fibers added gypsum composites. Challenge Journal Of Structural Mechanics. (2018); (4)1:9-12. Cited by reference [14]. [CrossRef] [Google Scholar]
- Sanad ME, Combe, Grant AA. The Use of Additives to Improve the mechanical properties of Gypsum Products. Journal of Dental Research. (1982); (61)6: 808-810. Cited by reference [14]. [CrossRef] [PubMed] [Google Scholar]
- Papageorgiou A, Tzouvalas G Tsimas S. Use of Inorganic Setting Retarders in Cement Industry. Cement and Concrete Research. (2005);25:183-189 Cited by reference [14]. [CrossRef] [Google Scholar]
- Murat M, Attari A. Modification of some physical properties of gypsum plaster by addition of clay minerals. Cement and Concrete Research. (1991);2:378-378. Cited by reference [14]. [Google Scholar]
- Joshi RC, Thomas JO, Adam RB. Properties of gypsum wall boards containing fly ash. Journal of Materials in Civil Engineering. (1992);4(2):212–25. Cited by reference [14]. [CrossRef] [Google Scholar]
- Bentur A, Kovler K, Goldman A, “Gypsum of improved perfromance using blends with portland cement and silica fume,” advance in cement research. (1995); (6)23:109-116. Cited by reference [14]. [Google Scholar]
- Deng Y, Furuno T, Uehara T. Improvement on the properties of gypsum particleboard by adding cement. Journal of Wood Science. (1998);44:98-102. Cited by reference [14]. [CrossRef] [Google Scholar]
- Hernandez F, Bollati MR, Rioc M, Parga B. Development of cork gypsum composites for building applications. Construction and Building Materials. (1999);13:179–86. Cited by reference [14]. [CrossRef] [Google Scholar]
- AL-Ridha, S. D., Ali A. Abbood, and Hussein H. Hussein. “Improvement of gypsum properties using SF additive.” International Journal of Science and Research 6.8 (2015): 504-509. [Google Scholar]
- Abbood A. A. “Improvement of Gypsum Characteristics using (T.G.P.) and (P.V.A.) Additives”, International Journal of Science and Research (IJSR), Volume 7, Issue 2, February 2018. [Google Scholar]
- AL-Ridha, Ahmed SD, Ali A. Abbood, Ali F. Atshan, Hussein H. Hussein, Layth Sahib Dheyab, Mohammed Sabah Mohialdeen, and Hameed Zaier Ali. “A Comparative Study Between the Individual, Dual and Triple Addition of (SF),(TGP) and (PVA) for Improving Local Gypsum (Juss) Properties.” In International Congress and Exhibition” Sustainable Civil Infrastructures”, pp. 65-79. Springer, Cham, 2019. https://doi.org/10.1007/978-3-030-34249-4_7 [Google Scholar]
- Dhaheer, MS Abo, and H. K. Ammash. “Improvement of ordinary and pure gypsum properties by using polyvinyl alcohol (PVA).” Int. J. Civ. Eng. Technol 9.9 (2018): 323-334. [Google Scholar]
- AL-Ridha, Ahmed SD, Ali A. Abbood, Yasir M. Al-Badran, Hussein H. Hussein, Layth Sahib Dheyab, Ali F. Atshan, Isam Dhahir Khudhur, Mahdi Resham Alak, and Aisha Arkan Ahmed. “Comparative study between the individual, dual and triple addition of (SF),(TGP) and (PVA) for improving Local Plaster of Paris (LPOP) properties.” Materials Today: Proceedings 56 (2022): 2721-2729. https://doi.org/10.1016/j.matpr.2021.09.401 [Google Scholar]
- Abbood, Ali A., Ali F. Atshan, and Ahmed SD AL-Ridha. “Improvement of Local Gypsum Plaster Setting Time by the Combined Usage of (TGP) and (PVA) Additives.” In IOP Conference Series: Materials Science and Engineering, vol. 870, no. 1, p. 012106. IOP Publishing, 2020. https://doi.org/10.1088/1757-899X/870/1/012106 [CrossRef] [Google Scholar]
- AL-Ridha, Ahmed SD, Ali A. Abbood, Essam H. Elaiwi, Hussein H. Hussein, and Layth Sahib Dheyab. “Increasing the Setting Time of Local Gypsum (Joss) by the Use of TGP additive.” In IOP Conference Series: Materials Science and Engineering, vol. 888, no. 1, p. 012078. IOP Publishing, 2020. https://doi.org/10.1088/1757-899X/888/1/012078 [CrossRef] [Google Scholar]
- Elaiwi, Essam H., Ali Kadhim Ibrahim, Saeb F. Al-Chalabi, Ali A. Abbood, Farah M. Hussein, Hussein H. Hussein, and Ahmed SD AL-Ridha. “The influence of water-gypsum ratio on the properties of national gypsum (Jοss) for various additives.” Materials Today: Proceedings 80 (2023): 1327-1333. [CrossRef] [Google Scholar]
- Al-Chalabi, Saeb F., Essam H. Elaiwi, Farah M. Hussein, Ali A. Abbood, Sinan Khaleel Ibrahim, Hussein H. Hussein, Firas Saeed Abbas, Eng Lubna Najim Abdullah, Eng Zinah Ahmed Shukri, and Ahmed SD AL-Ridha. “Evaluating the individual, dual usage of (TGP) and (SF) additives on improving gypsum characteristics.” Materials Today: Proceedings 62 (2022): 4567-4573. https://doi.org/10.1016/j.matpr.2022.05.305 [CrossRef] [Google Scholar]
- Singh M, Mridul G. Glass fibre reinforced water resistant gypsum based composites. Cement Concrete Reasearch. (1992);14(1):23–32. Cited by reference [14]. [CrossRef] [Google Scholar]
- Li G, Yu Y, Zhao Z, Li J, Li C. Properties study of cotton stalk fiber/gypsum composites. Cement Concrete Reasearch. (2003);33(1):43–6. Cited by reference [14]. [CrossRef] [Google Scholar]
- Medina NF, Barbero-Barrera MM. Mechanical and physical enhancement of gypsum composites through a synergic work of polypropylene fiber and recycled isostatic graphite filler. Construction and Building Materials. (2017);131:165-177. Cited by reference [14]. [CrossRef] [Google Scholar]
- Wu YF, Dare MP. Flexural and shear strength of composite lintels in glass fiber reinforced gypsum wall constructions. Journal of Materials in Civil Engineering. (2006);18(3): 415-423. Cited by reference [14]. [CrossRef] [Google Scholar]
- AL-Ridha, Ahmed SD, Ali A. Abbood, Laith S. M. Al-Asadi, Hussein H. Hussein and Layth Sahib Dheyab “Effect of Adding Chopped Carbon Fiber (CCF) on the Improvement of Gypsum Plaster Characteristics “ In IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2020 [Google Scholar]
- Jameel, Mohammed Abid, Laith SM Al-Asadi, Zuhair Abd Hacheem, and Ahmed SD AL-Ridha. “Effect of Chopped Carbon Fibre (CCF) on enhancing the compressive strength and density of gypsum plaster.” Materials Today: Proceedings (2022). [Google Scholar]
- Al-Ridha, Ahmed SD, Abbas Firas Saeed, Mahdi Faris Hamid Abdul, Dheyab Layth Sahib, Ali Hameed Zaier, and Mohialdeen Mohammed Sabah. “The influence of chopped copper fibre (CF) on the improvement of pure gypsum by compressive strength.” Journal of Applied Engineering Science 20, no. 2 (2022): 546-551. [CrossRef] [Google Scholar]
- AL-Ridha, Ahmed SD, Ali A. Abbood, Farah M. Hussein, Layth Sahib Dheyab, Eng Lubna Najim Abdullah, Eng Hameed Zaier Ali, Eng Mohammed Sabah Mohialdeen, and Eng Azaldeen Ali Abdulhussein. “Effect of Chopped Sisal fiber (CSF) on enhancing the compressive strength of Local Plaster of Paris (LPOP).” Materials Today: Proceedings 47 (2021): 2575-2579. [CrossRef] [Google Scholar]
- Shubber, Arshad Nadhom, Firas Saeed Abbas, Hayder Mohammed AL-Taweel, Sinan Khaleel Ibrahim, Ali Al-Balhawi, Yasir M. Al-Badran, Layth Sahib Dheyab, and Ahmed SD Al-Ridha. “The Evaluation Effect of Copper Fibre Diameter on Enhancing Compressive Strength of Pure Gypsum.” Journal of Ecological Engineering 24, no. 11 (2023): 148-154. [CrossRef] [Google Scholar]
- Hussein, Farah M. “Effect of chopped carbon fibers (CCF) and water to gypsum ratio on the compressive strength and density of gypsum plaster.” In AIP Conference Proceedings, vol. 2917, no. 1. AIP Publishing, 2023. https://doi.org/10.1063/5.0175848 [Google Scholar]
- Ibrahim, S. K., et al. “ Influence of steel fiber (SF) addition on the enhancement compressive strength of pure gypsum.” Materials Today: Proceedings (2023). [Google Scholar]
- W. S. SMITH, “Engineered Materials Handbook-Vol. 1” (ASM International, Ohio, 1987) p. 49. Cited by reference[31] [Google Scholar]
- Chand, S. “Review carbon fibers for composites.” Journal of materials science 35.6 (2000): 1303-1313. [CrossRef] [Google Scholar]
- J. B. DONNET and R. C. BANSAL, “Carbon Fibers” (Marcel Dekker, Inc., New York, 1990). Cited by reference [31]. [Google Scholar]
- S. Bharathidasan, T. K. Krushnadesikan “ Carbon Fibre Reinforced Gypsum Buildings” International Journal of Innovative Science Engineering and Technology, Vol. 2 Issue 2, February 2015. [Google Scholar]
- AL-Ridha, Ahmed SD, Ali Kadhim Ibrahim, Hayder Mohammed AL-Taweel, and Layth Sahib Dheyab. “Effect of Steel Fiber on Ultrasonic Pulse Velocity and Mechanical Properties of Self-Compact Light Weight Concrete.” In IOP Conference Series: Materials Science and Engineering, vol. 518, no. 2, p. 022017. IOP Publishing, 2019. https://doi.org/10.1088/1757-899X/518/2/022017 [CrossRef] [Google Scholar]
- Fadhil H., Luma. 2010. “Residual Compressive and Flexural Strength of Self Compacting Concrete Exposed to High Temperature”. Journal of Engineering and Sustainable Development 14 (1):149-68. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/1488. [Google Scholar]
- Abudel Salam, Lina. 2015. “Effect of Steel Fiber and Silica Fume on Hardened Concrete Compressive and Flexural Strength”. Journal of Engineering and Sustainable Development 19 (1):68-86. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/687 [Google Scholar]
- AL-Ridha A. S. D “The Influence of Size of Lightweight Aggregate on The Mechanical Properties Of Self-Compacting Concrete With and Without Steel Fiber” International Journal of Structural & Civil Engineering Research, Vol. 3, No. 1, February 2014. [Google Scholar]
- AL-Ridha, Ahmed SD, Ali A. Abbood, Saeb F. Al-Chalabi, Abaa M. Aziz, and Layth Sahib Dheyab. “A Comparative Study between the Effect of Steel Fiber on Ultrasonic Pulse Velocity (UPV) in Light and Normal Weight Self-Compacting Concretes.” In IOP Conference Series: Materials Science and Engineering, vol. 888, no. 1, p. 012081. IOP Publishing, 2020. https://doi.org/10.1088/1757-899X/888/1/012081 [CrossRef] [Google Scholar]
- AL-Ridha, Ahmed SD, Ali A. Abbood, and Ali F. Atshan. “Assessment of the Effect of Replacing Normal Aggregate by Porcelinite on the Behaviour of Layered Steel Fibrous Self-Compacting Reinforced Concrete Slabs under Uniform Load.” Journal of Engineering 2020 (2020). https://doi.org/10.1155/2020/3650363 [Google Scholar]
- Al-Ridha, Ahmed SD, A. HAmeed, and Sinan Khaleel Ibrahim. “Effect of steel Fiber on the Performance of Hot Mix Asphalt with Different Temperatures and Compaction” Australian Journal of Basic and Applied Sciences 8, no. 6 (2014): 123-132. [Google Scholar]
- AL-Ridha, Ahmed SD, Asst Lec Sinan K. Ibrahim, and Eng Layth Sahib Dheyab. “Steel Fiber Effect on the Behavior of Hot Mixture Asphalt with Variable Asphalt Content” International Journal of Advanced Technology in Engineering and Science, Volume No 04, Special Issue No. 01, February 2016. [Google Scholar]
- Al-Sarraf, S.Z, Diab, A.S., Al-Shaarbaf, I.A. and Diab, A.S., 2011. Effect of Steel Fiber on the Behavior of Deep Beams with and without Web Opening. Engineering and Technology Journal, 29(1), pp.1-19. [Google Scholar]
- Elaiwi EH, Al-Chalabi SF, Al-Asadi LS, Abbood AA, AL-Ridha AS. “Evaluating the Performance of Fibrous Cement Mortar Containing Chopped Carbon Fiber (C.C.F.)” In IOP Conference Series: Materials Science and Engineering 2020. IOP Publishing [Google Scholar]
- AL-Ridha, A.S.D., Abuzaid, E.K.M. and Abbood, A.A.R., 2018. Effect of Addition of Chopped Carbon Fiber on The Behavior of Reinforced Concrete Beams With Variable (Shear Distance To Effective Depth) Ratios. Journal of Engineering and Sustainable Development, 22(1), pp.137-148. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/336 [CrossRef] [Google Scholar]
- Al-Ridha, Ahmed SD, et al. “Influence of Fibrous Layers on the Behavior of Self-Compacting Light-weight Reinforced Concrete (SCLRC) Slabs under Area Load.” Advances in Civil Engineering Materials 13.1 (2024): DOI: 10.1520/ACEM20230130 [Google Scholar]
- ASTM C472-20 (2020), Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete, ASTM International, West Conshohocken, PA, 2020 [Google Scholar]
- Q. L. Yu and H. J. H. Brouwers, “Microstructure and mechanical properties of b-hemihydrate produced gypsum: An insight from its hydration process,” Construction and Building Materials, vol. 25, pp.3149-3157, 2011. Cited by reference Sayonara M. M. Pinheiro and Gladis Camarini “Characteristics of Gypsum Recycling in Different Cycles” IACSIT International Journal of Engineering and Technology, Vol. 7, No. 3, June 2015. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.