Open Access
Issue |
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
|
|
---|---|---|
Article Number | 04023 | |
Number of page(s) | 12 | |
Section | Structural Engineering & Concrete Technology | |
DOI | https://doi.org/10.1051/e3sconf/202455904023 | |
Published online | 08 August 2024 |
- E. Güneyisi, M. Gesoğlu, Q. Kareem, and S. İpek, “Effect of different substitution of natural aggregate by recycled aggregate on performance characteristics of pervious concrete,” Mater. Struct. Constr., vol. 49, no. 1–2, pp. 521–536, 2016, doi: 10.1617/s11527-014-0517-y. [CrossRef] [Google Scholar]
- A. Bonicelli, G. M. Arguelles, and L. G. F. Pumarejo, “Improving Pervious Concrete Pavements for Achieving More Sustainable Urban Roads,” Procedia Eng., vol. 161, pp. 1568– 1573, 2016, doi: 10.1016/j.proeng.2016.08.628. [CrossRef] [Google Scholar]
- M. Sonebi, M. Bassuoni, and A. Yahia, “Pervious concrete: Mix design, properties and applications,” RILEM Tech. Lett., vol. 1, pp. 109–115, 2016, doi: 10.21809/rilemtechlett.2016.24. [CrossRef] [Google Scholar]
- S. K. Sah, S. N. Guntakal, and S. S. Selvan, “Experimental Study on behavior of Pervious Concrete in Strength and Permeability by Changing Different Parameters,” Int. J. Appl. Eng. Res., vol. 13, no. 6, pp. 4550–4554, 2018, [Online]. Available: http://www.ripublication.com [Google Scholar]
- A. T. Jasim and Z. H. Abdulabbas, “Production of sustainable pervious concrete by using waste tires rubber as partial replacement of coarse aggregate,” AIP Conf. Proc., vol. 2213, no. March, 2020, doi: 10.1063/5.0000255. [Google Scholar]
- R. Sharma and P. P. Bansal, “Use of different forms of waste plastic in concrete - A review,” J. Clean. Prod., vol. 112, pp. 473–482, 2016, doi: 10.1016/j.jclepro.2015.08.042. [CrossRef] [Google Scholar]
- S. Talsania, J. Pitroda, and C. M. Vyas, “A Review of Pervious Concrete by Using Various Industrial Waste Materials,” J. Int. Acad. Res. Multidiscip., vol. 2, no. 12, pp. 142–151, 2015. [Google Scholar]
- C. M. Rochman, E. Hoh, B. T. Hentschel, and S. Kaye, “Classify plastic waste as hazardous (types of externalities caused by consumption of plastic bags),” Environ. Sci. Technol., vol. 47, no. 3, pp. 1646–1654, 2013. [Google Scholar]
- S. Chowdhury, A. T. Maniar, and O. Suganya, “Polyethylene Terephthalate ( PET ) Waste as Building Solution,” Int. J. Chem. Environ. Biol. Sci., vol. 1, no. 2, pp. 2320–4087, 2013. [Google Scholar]
- J. Jaskowska-Lemańska, M. Kucharska, J. Matuszak, P. Nowak, and W. Łukaszczyk, “Selected Properties of Self-Compacting Concrete with Recycled PET Aggregate,” Materials (Basel)., vol. 15, no. 7, 2022, doi: 10.3390/ma15072566. [Google Scholar]
- T. K. M. Ali, N. Hilal, R. H. Faraj, and A. I. Al-Hadithi, “Properties of eco-friendly pervious concrete containing polystyrene aggregates reinforced with waste PET fibers,” Innov. Infrastruct. Solut., vol. 5, no. 3, 2020, doi: 10.1007/s41062-020-00323-w. [Google Scholar]
- R. P. Borg, O. Baldacchino, and L. Ferrara, “Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete,” Constr. Build. Mater., vol. 108, pp. 29–47, 2016, doi: 10.1016/j.conbuildmat.2016.01.029. [CrossRef] [Google Scholar]
- R. Saxena, T. Gupta, R. K. Sharma, S. Chaudhary, and A. Jain, “Assessment of mechanical and durability properties of concrete containing PET waste,” Sci. Iran., vol. 27, no. 1, pp. 1–9, 2020, doi: 10.24200/sci.2018.20334. [Google Scholar]
- L. Cole, R. Bakheet, and S. Akib, “Influence of Using Waste Plastic and/or Recycled Rubber as Coarse Aggregates on the Performance of Pervious Concrete,” Eng, vol. 1, no. 2, pp. 153–166, 2020, doi: 10.3390/eng1020010. [CrossRef] [Google Scholar]
- P. Solanki and S. Bhattarai, “Strength and permeability of pervious composite prepared by using post-consumer plastic waste bottles,” MATEC Web Conf., vol. 174, 2018, doi: 10.1051/matecconf/201817402001. [CrossRef] [EDP Sciences] [Google Scholar]
- IS 8112, “Specification for 43 Grade Ordinary Portland Cement. Bureau of Indian Standards, India,” New Delhi, India, 1989. [Google Scholar]
- IS:383, “Specification for Coarse and Fine Aggregates From Natural Sources for Concrete,” New Delhi, India, 1970. [Google Scholar]
- ACI, Report on Pervious Concrete, ACI 522R-10, vol. 10, no. Reapproved. 2010. [Google Scholar]
- “BIS:516, Methods of tests for strength of concrete,” New Delhi, India, 1959. [Google Scholar]
- S. İpek, A. Diri, and K. Mermerdaş, “Recycling the low-density polyethylene pellets in the pervious concrete production,” J. Mater. Cycles Waste Manag., vol. 23, no. 1, pp. 272–287, 2021, doi: 10.1007/s10163-020-01127-x. [CrossRef] [Google Scholar]
- N. Saikia and J. De Brito, “Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate,” Constr. Build. Mater., vol. 52, pp. 236–244, 2014, doi: 10.1016/j.conbuildmat.2013.11.049. [CrossRef] [Google Scholar]
- K. H. Obla, “Pervious concrete - An overview,” Indian Concr. J., vol. 84, no. 8, pp. 9–18, 2010. [Google Scholar]
- K. Ćosić, L. Korat, V. Ducman, and I. Netinger, “Influence of aggregate type and size on properties of pervious concrete,” Constr. Build. Mater., vol. 78, pp. 69–76, 2015, doi: 10.1016/j.conbuildmat.2014.12.073. [CrossRef] [Google Scholar]
- IS 5816-1999, “Indian standard Splitting tensile strength of concrete-method of test,” New Delhi, India, 1999. [Google Scholar]
- E. Rahmani, M. Dehestani, M. H. A. Beygi, H. Allahyari, and I. M. Nikbin, “On the mechanical properties of concrete containing waste PET particles,” Constr. Build. Mater., vol. 47, pp. 1302–1308, 2013, doi: 10.1016/j.conbuildmat.2013.06.041. [CrossRef] [Google Scholar]
- A. Jain, N. Sharma, R. Choudhary, R. Gupta, and S. Chaudhary, “Utilization of non-metalized plastic bag fibers along with fly ash in concrete,” Constr. Build. Mater., vol. 291, p. 123329, 2021, doi: 10.1016/j.conbuildmat.2021.123329. [CrossRef] [Google Scholar]
- ASTM C 642–06, “Standard test method for density, absorption, and voids in hardened concrete,” 2008. [Google Scholar]
- Bureau of Indian Standards (BIS), “IS 1237-2012 Indian Standard cement concrete flooring tiles,” New Delhi, India, 2012. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.