Open Access
Issue |
E3S Web Conf.
Volume 564, 2024
International Conference on Power Generation and Renewable Energy Sources (ICPGRES-2024)
|
|
---|---|---|
Article Number | 11003 | |
Number of page(s) | 10 | |
Section | Power Engineering and Materials | |
DOI | https://doi.org/10.1051/e3sconf/202456411003 | |
Published online | 06 September 2024 |
- K.P. Rajurkar, M.M. Sundaram. Audit of Electrochemical and Electrodischarge Machining, (2013) [Google Scholar]
- K. Quancun, L. Guodong, L. Yong. Readiness of empty anode utilized for miniature ECM. Optics and Accuracy Designing. [Google Scholar]
- D. Zhu, H.Y. Xu. Improvement of electrochemical machining accuracy by using dual pole tool. J. Mater. Process. Technol., 129, 1-3, 15-18, (2002) [CrossRef] [Google Scholar]
- S.K. Mukherjee, S. Kumar, P.K. Srivastava, A. Kumar. Impact of valance on material evacuation rate in electrochemical machining of SS304. Diary of Materials Handling Technology, 2, 2, (2007) [Google Scholar]
- T. Sekar, R. Marappan. Working on Material Evacuation Pace of Electrochemical Machining by Utilizing Turning Device. Global Diary of Machine Instruments and Assembling, 44, (2008) [Google Scholar]
- M. Malapati B. Bhattacharyya, J. Munda. Trial concentrate on electrochemical micromachining. Diary of Mater. Hand. Innov., 169, 485492, (2005) [Google Scholar]
- J. Ciriloda Silva Neto, E. Malaquias Da Silva, M. Baccida Silva. Mediating factors in electrochemical machining. Diary of Mater. Hand. Innov., 179, (2006) [Google Scholar]
- H. Hocheng, Y.H. Sun, S.C. Lin, P.S. Kao. A material evacuation investigation of electrochemical machining utilizing level end cathode. Diary of Mater. Hand. Innov., 140, (2003) [Google Scholar]
- U. Mallick. Assessment of MRR by utilizing U-shape Terminal in Electrochemical Machining. M. Sc proposal, Public Foundation Innovation, India, (2009) [Google Scholar]
- E. Ferraris, V. Castiglioni, F. Ceyssens, M. Annoni, B. Lauwer, D. Reynaerts. ECM penetrating of Super high angle proportion miniature openings with protected apparatuses Diary of Assembling Innovation, 62, 191-194, (2013) [Google Scholar]
- T. Hao, L. Yong, Z. Long, L. Baoquan. Component plan and cycle control of miniature ECM for penetrating shower openings of diesel injector spouts Diary of Accuracy Designing, 37, 213-221, (2013) [Google Scholar]
- E.S. Lee, J.W. Park, Y.H. Moon. A concentrate onelectrochemical miniature machining for manufacture of miniature notches in an air-greased up hydro dynamic bearing. Int J Adv Manuf Technol., 20, 720-726, (2002) [CrossRef] [Google Scholar]
- B. Bhattacharyya, J. Munda. Exploratory examination because of electrochemical machining boundaries on machining rate and precision in micromachining space. Int J Mach Apparatus Manuf., 43, 1301-1310, (2003) [CrossRef] [Google Scholar]
- M. Malapati, B. Bhattacharyya.Examination into electrochemical micromachining process during miniature channel age. Mater Manuf Interaction., 26, 1019-1027, (2011) [CrossRef] [Google Scholar]
- V. Kirchner, L. Cagnon, R. Schuster, G.Ertl. Electrochemical machining of treated steel microelements with ultrashort voltage heartbeats. Appl Phys Lett., 79, 1721-1723, (2001) [CrossRef] [Google Scholar]
- B.H. Kim, C.W. Na, Y.S. Lee, D.K. Choi, C.N. Chu. Miniature electrochemical machining of 3D microstructure utilizing weaken sulfuric corrosive. Ann CIRP, 54, 1, 191-194, (2005) [CrossRef] [Google Scholar]
- A.J. Troubadour, L.R. Faulkner. Electrochemical strategies second ed. Wiley, Hoboken 26. [Google Scholar]
- R. Schuster, V. Kirchner, P. Allongue, G. Ertl. Electrochemical micromachining. Science, 289, 98-101, (2001) [Google Scholar]
- B. Ghoshal, B. Bhattacharyya. Impact of vibration on miniature apparatus manufacture by electrochemical machining. Int J Mach Apparatus Manufact., 64, 49-59, (2013) [CrossRef] [Google Scholar]
- A.J. Troubadour, L.R. Faulkner. Electrochemical strategies second ed. Wiley, Hoboken, (2001) [Google Scholar]
- R. Schuster, V. Kirchner, P. Allongue, G. Ertl. Electrochemical micromachining. Science, 289, 98-101, (2000) [CrossRef] [PubMed] [Google Scholar]
- M.D. Vedenyapina, E.D.Strel’tsova, N.A. Davshan. Russ. J. Appl. Chem., 84, 2, 204-207, (2011) [CrossRef] [Google Scholar]
- Al-Ameen, Z., Sulong, G., & Johar, M. G. M. (2012a). Enhancing the contrast of CT medical images by employing a novel image size dependent normalization technique. International Journal of Bio-Science and Bio-Technology, 4(3), 63–68. https://www.scopus.com/inward/record.uri?eid=2-s2.0- 84867190043&partnerID=40&md5=33c0335582d84a5fdcdf876b6c4fe7c9 [Google Scholar]
- Al-Ameen, Z., Sulong, G., & Johar, M. G. M. (2012b). Fast deblurring method for computed tomography medical images using a novel kernels set. International Journal of Bio-Science and Bio-Technology, 4(3), 9–20. https://www.scopus.com/inwsard/record.uri?eid=2-s2.0- 84867179572&partnerID=40&md5=25426056fc4c68222b70607d7954e36d [Google Scholar]
- Noel Martin, Aezeden Mohamed, Sustainable Biodiversity Preservation in the Pacific. 2023, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM2023. https://doi.org/10.46254/an13.20230681 [Google Scholar]
- Noel Martin, Aezeden Mohamed, Umamaheswararao Mogili, Practicing Sustainable Procurement in Papua New Guinea, Proceedings of the International Conference on Industrial Engineering and Operations Management IEOM2023. https://doi.org/10.46254/an13.20230685 [Google Scholar]
- Pragathi, B., and P. Ramu. “Authentication Technique for Safeguarding Privacy in Smart Grid Settings.” E3S Web of Conferences. Vol. 540. EDP Sciences, 2024. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.