EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 564 (2024) E3S Web Conf., 564 (2024) 11005 References
Open Access
Issue
E3S Web Conf.
Volume 564, 2024
International Conference on Power Generation and Renewable Energy Sources (ICPGRES-2024)
Article Number 11005
Number of page(s) 9
Section Power Engineering and Materials
DOI https://doi.org/10.1051/e3sconf/202456411005
Published online 06 September 2024
  1. A. Yahya, A. Diouf-Lewis, F. Sosa-Rey, R.D. Farahani, N. Piccirelli. Martin part: Additive production and characterization of high transferability thermoplastics can exploit the aeronautical properties of the mixtures. Compos. Sci. Technol.., 231, (2023) [Google Scholar]
  2. C. Shujun, H. Zhi, X. Jun, G. Shengnan, W. Zhimin, L. Jianwei. Heat treatment, etc. Development of microstructure and mechanical properties of nickel-based superalloy GH4169 produced by additive melting. J. Alloys Compd., 947 (2023) [Google Scholar]
  3. F. Khodabakhshi, N. Hasani, M.R. Kalaye, A. Hadazadeh, M.A. Wells, M. Mohammadi. Dynamic recrystallization of additively produced 316L stainless steel under thermal deformation. Mater Propert., (2023) [Google Scholar]
  4. Z. Hong, L. Dong, P. Yubin, C. Tang, Z. Tongfei, W. Tianjian, W. Xiaoyan, L. Yongjie. Tensile behavior, microstructural development and deformation mechanisms of high pressure Nb-TiAl alloy. It is further produced by electron beam melting. Mater. Des., 225, (2023) [Google Scholar]
  5. I.L.P. Raj, S. Valanarasu, K. Hariprasad, J.S. Ponraj, N. Chidhambaram, V. Ganesh, Y. Khairy. Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications. Opt. Mater., 109, (2020) [Google Scholar]
  6. M. Pragya, P. Kerfeldt, F. Swan, E. Nilsson, F. Forouzan, and T. Martha-Lena Antti. Properties of microstructure. Characteristics of machine manufacturing. Characteristics of machine structure. kevua tau Zoo 21-6-9 stainless steel hlau yog siv aerospace field. Jour. Mater. Res. Tiab Techn., (2023) [Google Scholar]
  7. A. Ankita, A. Gupta, K.K. Saxena, R.K. Dwivedi, D. Kundalkar, D. Saad Abdul-Zahra. Sago no. Stamping design and analysis of Al6061 corner panels: comparative search. Adv. Mater. Process. Techn., 1-10, (2022) [Google Scholar]
  8. V.G. Anatoly. Microstructure of titanium aluminide alloy produced by in situ laser additive manufacturing. Metal., 13, 8, (2023) [Google Scholar]
  9. G. Kalpana, P.V. Kumar, S. Aljavarne, R.V. Krishnaiah. Changing adaptive homomorphic encryption for mobile devices and cloud. Lear. Comp. Electr. Eng., 65, 178-195, (2018) [CrossRef] [Google Scholar]
  10. L. Fengchao, P. Dong, A.S. Han, Y. Zhang, R. Cheng, A. Taub, Z. Ma. 3D printing of microscopic aluminum alloys using extrusion-based additive manufacturing: microstructure and precedents. J. Mater. Sci. Technol., 139, 126-136, (2023) [CrossRef] [Google Scholar]
  11. A. Sharifi, F. Khodabakhshi, S.F. Kashani-Bozorg, A.P. Gerlich. The same goes for the microstructure and mechanical properties of AA6061 alloy in the additive manufacturing of friction coatings. Mater. Sci. Des., A, (2023) [Google Scholar]
  12. Z. Yubei, L. Shan, L. Xiaodong, L. Xin, D. Wenyang, L. Liang, L. Bingshan, W. Gong. We also characterize the fabrication and microstructural evolution of photopolymerization of cubic-shaped Inconel 718 superalloy. Addit. Manuf., 61 (2023) [Google Scholar]
  13. B. Awasthi, A. Kuldeep, K. Saxena, V. Arun. Sustainable and smart steel production. Ship. Modern Materials: Proceedings, 44, 2069-2079, (2021) [Google Scholar]
  14. P.T. Naidu, S. Banot, M. Tanaka, H. Murakami, K. Kakehi. The role of yttrium. Influence of microalloying on the microstructural evolution and high-temperature mechanical properties of bulk Ib 718. ãÃMaterials and Design, 225, (2023) [Google Scholar]
  15. C. Varun, M.S.K.K.Y. Nartu, S. Dasari, S.M. Varahabhatla, A. Sharma. Madhavan Chapter Magnetic and Mechanical Properties of Addition Enriched Alloys of Alx Composites (CoFeNi). Script Materials, 224, (2023) [Google Scholar]
  16. P.V. Dhoni, K.S. Joseph Wilson, K.S. Hariprasad, V. Ganesh, H. Elkhosini Ali, H. Algarni, I.S. Yaji. Improvement of optoelectronic properties of Al-doped ZnO thin films in photodetectors. Superla. Tiab Microstru., 151, (2021) [Google Scholar]
  17. N. Anish, S. Kumanan, C. Prakash, D.G. Mohan, K. Kumar Sksena, S. Tshuge. Scientific and experimental study on suitability and uncertainty of superalloys examine. J. Adhes. Sci. Technol., 1-72, (2023) [Google Scholar]
  18. S. Vinoth, G. Kanimozhi, K. Hari Prasad, K. Harish, E.S. Srinadhu, N. Satyanarayana. Polymer fibers with reduced ionic conductivity from electrospun nanocomposites (PVDF HFP TiO2 nanofiber filler). Electrolyte for DSSC applications. Polym. Compos., 40, 4, 1585-1594, (2019) [Google Scholar]
  19. D.K. Mithilesh, S. Singh, V.K. Pathak, K.K. Saxena, M.K. Agrawal, Vinayak Tshuj: Optimization of surface properties of biocompatible materialsâ Ti6Al4V nrog RCCD thiab NSGA II threatened by screen EDM. J. Mater. Technol.Res., (2023) [Google Scholar]
  20. L. Haifei, D. Weiwei, L. Kaiyu, C. Yuhua, W. Jian, L. Jinzhong. Ultrastructure of Txiav. Hybrid Additive Manufacturing Technology Siv. Additively manufactured titanium alloy Ti6Al4V. Manufacturing, 63, (2023) [Google Scholar]
  21. C. Debatia, A. Rathi, R. Singh, V.K. Pathak, A.K Srivas Four, T. Saxena, G. Kumar, S. Kumar. External 6-bar index finger rehabilitation device: design and image synthesis. Robot. Auton. Syst., 161, (2023) [Google Scholar]
  22. J. Faith, S.E. Pramila, J.A. Slotwinski, T.P. Wei. Evolution of microstructure. Mechanical properties of additionally produced AlSi10Mg at room temperature and cryogenic temperature. Addit. Manuf., 36 (2020) [Google Scholar]
  23. S. Sambasivam, A.S. Abed, S. Chopde, P.P. Patil, P. Math, A. Parmar, A. Awasthi. Role of processing techniques related to Mg-MMCs for biomedical implantation: an overview. Materials Today: Proceedings, (2023) [Google Scholar]
  24. Chapter Paper Automatic Detection of Cardiac Arrhythmias Using Machine Learning: SVM. Information of the Day: Proceedings, 45, 1393 -1398, (2021) [Google Scholar]
  25. Al-Ameen, Z., Sulong, G., & Md Johar, M. G. (2013). Employing a suitable contrast enhancement technique as a pre-restoration adjustment phase for computed tomography medibcal images. International Journal of Bio-Science and Bio- Technology, 5(1). https://www.scopus.com/inward/record.uri?eid=2-s2.0- 84874703901&partnerID=40&md5=22b7d5e6b4c4ac3b6297dfbfa98b4cba [Google Scholar]
  26. Al-Debei, M. M., Abdeljaber, O., Yajid, M. S. A., Khatibi, A., Al-masaeed, S., & Tham, J. (2021a). The Role of Service Quality and Online Trust in Maintaining Clients for Malaysian Online Enterprises. International Journal of EBusiness and EGovernment Studies, 13(2), 149–167. https://doi.org/10.34109/ijebeg.202113209 [Google Scholar]
  27. Al-Humairi, S. N. S., Manimaran, P., Abdullah, M. I., & Daud, J. (2019). A Smart Automated Greenhouse: Soil Moisture, Temperature Monitoring and Automatic Water Supply System (Peaty, Loam and Silty). 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019, 111– 115. https://doi.org/10.1109/CSUDET47057.2019.9214661 [Google Scholar]
  28. Pragathi, B., and P. Ramu. “Authentication Technique for Safeguarding Privacy in Smart Grid Settings.” E3S Web of Conferences. Vol. 540. EDP Sciences, 2024. [Google Scholar]
  29. Alkawaz, M. H., Joanne Steven, S., Mohammad, O. F., & Gapar Md Johar, M. (2022). Identification and Analysis of Phishing Website based on Machine Learning Methods. 2022 12th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2022, 246–251. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.