EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 564 (2024) E3S Web Conf., 564 (2024) 11006 References
Open Access
Issue
E3S Web Conf.
Volume 564, 2024
International Conference on Power Generation and Renewable Energy Sources (ICPGRES-2024)
Article Number 11006
Number of page(s) 13
Section Power Engineering and Materials
DOI https://doi.org/10.1051/e3sconf/202456411006
Published online 06 September 2024
  1. J. Bian, M. Baoji, H. Ai, L. Qi. Experimental Study on the Influence of Tool Electrode Material on Electrochemical Micromachining of 304 Stainless Steel. Materials, 14, (2021) [Google Scholar]
  2. C. Xuezhen, X. Zhengyang, Z. Dong, F. Zhongdong, Z. Di. Experimental research on electrochemical machining of titanium alloy Ti60 for a blisk. Chinese J Aeronaut., 29, 1, 274–282, (2016) [CrossRef] [Google Scholar]
  3. I.A. Khan, M. Rani, R. Kumar Deb, B.R. Bundel. Effect on Material Removal Rate and Surface Finish in ECM Process When Machining Stainless Steel-316 with Cu Electrode. Int J Recent Technol Eng., 8, 4, 2933-2941, (2019) [Google Scholar]
  4. C. Senthilkumar, G. Ganesan, R. Karthikeyan. Study of electrochemical machining characteristics of Al/SiCp composites. Int J Adv Manuf Technol., 43, 256–263, (2009) [CrossRef] [Google Scholar]
  5. H. Liana, Z. Guoa, Z. Huanga Y. Tanga, J. Song. Experimental research of Al6061 on ultrasonic vibration assisted micro-milling. Procedia CIRP, 6, 561-564, (2013) [CrossRef] [Google Scholar]
  6. R. Thanigaivelan, R.M. Arunachalam. Experimental Study of Overcut in Electrochemical Micromachining for 304 Stainless Steel. Transactions of NAMRI/SME, 38, 253-260, (2010) [Google Scholar]
  7. T. Sathish. Experimental investigation of machined hole and optimization of machining parameters using electrochemical machining. J Mater Res Tech.., 8, 5, 4354-4363, (2019) [CrossRef] [Google Scholar]
  8. M. Siva, A. Karthikeyan, P. Muthukumar, B. Babu, R. Ragoth Singh, S. Surendar. Experimental analysis of aluminum metal matrix composites using electrochemical micro machining. Int. J. Eng. Res. Technol., 3, 2, 1331-1335, (2014) [Google Scholar]
  9. S. Chandrasekhar, N.B.V. Prasad. Multi-response optimization of electrochemical machining parameters in the micro-drilling of AA6061-TiB2in situ composites using the Entropy–VIKOR method. Proceedings of the Institution of Mechanical Engineers, Part B: J. Eng. Manuf., 234, 10, 1311-1322, (2020) [CrossRef] [Google Scholar]
  10. S. Niu, N. Qu, S. Fu, X. Fang, H. Li. Investigation of inner-jet electrochemical milling of nickel-based alloy GH4169/Inconel 718. J. Adv. Manuf. Technol., 93, 2123-2132, (2017) [CrossRef] [Google Scholar]
  11. L. Meng, Y. Zeng, D. Zhu. Helical carbon nanotube fiber tool cathode for wire electrochemical micromachining. J. Electrochem. Soc., 165, 13, 665-673, (2018) [Google Scholar]
  12. Q. Ningsong, F. Xiaolong, L. Wei, Z. Yongbin, Z. Di. Wire electrochemical machining with axial electrolyte flushing for titanium alloy. Chinese J Aeronaut., 26, 1, 224–229, (2013) [CrossRef] [Google Scholar]
  13. C. Senthilkumar, G. Ganesan, R. Karthikeyan. Parametric optimization of electrochemical machining of Al/15% SiCp composites using NSGA-II. Transactions of Nonferrous Metals Society of China, 21, 10, 2294-2300, (2011) [CrossRef] [Google Scholar]
  14. K.M. Cole, D.W. Kirk, C.V. Singh, S.J. Thorpe. Optimizing electrochemical micromachining parameters for Zr-based bulk metallic glass. J. Manuf. Process., 25, 227-234, (2017) [CrossRef] [Google Scholar]
  15. K.S. Kumar, R. Sivasubramanian, K. Kalaiselvan. Selection of optimum parameters in non conventional machining of metal matrix composite. Portugaliae Electrochimica Acta, 27, 4, 477-486, (2009) [CrossRef] [Google Scholar]
  16. A. Gomez-Gallegos, F. Mill, A.R. Mount, S. Duffield, A. Sherlock. 3D multiphysics model for the simulation of electrochemical machining of stainless steel (SS316). J. Adv. Manuf. Technol., 95, 2959-2972, (2018) [CrossRef] [Google Scholar]
  17. S. Pawanr, K. Gupta. Dry Machining Techniques for Sustainability in Metal Cutting: A Review. Processes, 12, 2, (2024) [Google Scholar]
  18. G. Singh, A.S. Bhui, Y. Lamichhane, P. Mukhiya, P. Kumar, B. Thapa. Machining performance and influence of process parameters on stainless steel 316L using die- sinker EDM with Cu tool. Mater. Today Proc., 18, 2468-2476, (2019) [CrossRef] [Google Scholar]
  19. D. Arulkirubakaran, M.R. Prince, D. Palanisamy, N. Manikandan, R. Ramesh. ECM machining and its process optimization for AISI 304 steel. In Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019, Springer Singapore, 357-365, (2021) [Google Scholar]
  20. J.E. Abu Qudeiri, A. Saleh, A. Ziout, A.H.I. Mourad, M.H. Abidi, A. Elkaseer. Advanced electric discharge machining of stainless steels: Assessment of the state of the art, gaps and future prospect. Materials, 12, 6, (2019) [Google Scholar]
  21. Aezeden Mohamed, Formation and Pattern of Hexagonal Pyramid and Triangular Etch Pits and Relationship to Dislocation in Deformed Nickel-Based Super Alloys, International Journal of Scientific Research, Vol. 3, Issue 8, pp. 53, 2013. https://doi.org/10.9790/3021-03815357 \ [Google Scholar]
  22. Aezeden Mohamed, Microstructural Characterization and Mechanical Properties of New Grade Al-Li Alloy, International Journal of Scientific Research, Vol. 3, Issue 9, pp. 17, 2013. https://doi.org/10.9790/3021-03941722 [Google Scholar]
  23. Aezeden Mohamed and Jack Cahoon, Oxide Surface Analysis of Nickel Based Chromium Alloys with the Aid of Auger Electron Spectroscopy, International Journal of Engineering Research and Development, Vol. 7, Issue 7, pp. 33, 2013. https://doi.org/10.1016/j.proeng.2015.08.021 [Google Scholar]
  24. Pragathi, B., and P. Ramu. “Authentication Technique for Safeguarding Privacy in Smart Grid Settings.” E3S Web of Conferences. Vol. 540. EDP Sciences, 2024. [Google Scholar]
  25. Al-Debei, M. M., Abdeljaber, O., Yajid, M. S. A., Khatibi, A., Al-masaeed, S., & Tham, J. (2021a). The Role of Service Quality and Online Trust in Maintaining Clients for Malaysian Online Enterprises. International Journal of EBusiness and EGovernment Studies, 13(2), 149–167. https://doi.org/10.34109/ijebeg.202113209 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.