EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 569 (2024) E3S Web Conf., 569 (2024) 01004 References
Open Access
Issue
E3S Web Conf.
Volume 569, 2024
GeoAmericas 2024 - 5th Pan-American Conference on Geosynthetics
Article Number 01004
Number of page(s) 8
Section Geosynthetic Properties 1
DOI https://doi.org/10.1051/e3sconf/202456901004
Published online 19 September 2024
  1. D. Leshchinsky, O. Leshchinsky, H.I. Ling, P.A. Gilbert, Geosynthetic tubes for confining pressurized slurry: some design aspects. J. Geotech. Eng. 122(8): 682–690 (1996). [CrossRef] [Google Scholar]
  2. E. Alvarez, R. Rubio, H. Ricalde, Beach restoration with geotextile tubes as submerged breakwaters in Yucatan, Mexico. Geotext. Geomembr. 25(4): 233–241 (2007). [CrossRef] [Google Scholar]
  3. E.C. Shin, Y.I. Oh, Coastal erosion prevention by geotextile tube technology. Geotext. Geomembr. 25(4): 264–277 (2007). [CrossRef] [Google Scholar]
  4. R.M. Koerner. Designing with Geosynthetics. Prentice-Hall, 5Th Edition, Volume 1. Upper Saddle River, New Jersey: Xlibris Corporation (2012). [Google Scholar]
  5. N.W.M. John, Geotextiles. Blackie. Chapman and Hall. New York: USA (1987). [Google Scholar]
  6. ASTM D5261-10, Standard Test Method for Measuring Mass per Unit Area of Geotextiles. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2010). [Google Scholar]
  7. ASTM D5199, Standard Test Method for Measuring the Nominal Thickness of Geosynthetics. ASTM, West Conshohocken, PA, USA (2012). [Google Scholar]
  8. ASTM D4595-11, Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2011). [Google Scholar]
  9. ASTM D5035-11, Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method). ASTM, West Conshohocken, PA, USA (2015). [Google Scholar]
  10. ASTM D5716/D5716M-15, Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2015). [Google Scholar]
  11. ASTM D6241-14, Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2014). [Google Scholar]
  12. ASTM D6364-06, Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2011). [Google Scholar]
  13. ASTM D4533 / D4533M-15, Standard Test Method for Trapezoid Tearing Strength of Geotextiles. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2015). [Google Scholar]
  14. ASTM D3786 / D3786M-13, Standard Test Method for Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2018). [Google Scholar]
  15. ASTM D5262, Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics. Am. Soc. Test. Mater, West Conshohocken, Pennsylvania, USA (2017). [Google Scholar]
  16. ASTM D7361-07, Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2012). [Google Scholar]
  17. ASTM D5493-06, Standard Test Method for Permittivity of Geotextiles Under Load. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2016). [Google Scholar]
  18. ASTM D4716 / D4716M-14, Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2013). [Google Scholar]
  19. ASTM D4751-16, Standard Test Methods for Determining Apparent Opening Size of a Geotextile. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2016). [Google Scholar]
  20. ASTM D4355, Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus. ASTM International, West Conshohocken, PA, USA (2002). [Google Scholar]
  21. ASTM D6389-99, Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2016). [Google Scholar]
  22. ASTM D1987-07, Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2016). [Google Scholar]
  23. ASTM D5321/D5321M-14, Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear. Am. Soc. Test. Mater. West Conshohocken, PA, USA (2014). [Google Scholar]
  24. ASTM D4886-10, Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method). Am. Soc. Test. Mater. West Conshohocken, PA, USA (2016). [Google Scholar]
  25. ASTM D5818-11, Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics. West Conshohocken, PA, USA (2011). [Google Scholar]
  26. J.L.E. Dias Filho, P.C.A. Maia, A non-conventional durability test for simulating creep of geosynthetics under accelerated degradation. Int. J. Geosynth. Ground Eng 7:65. https://doi.org/10.1007/s40891-021-00310-w (2021). [Google Scholar]
  27. ISO TS 13434, Geosynthetics-Guidelines for the Assessment of Durability. International Organization for Standardization, Brussels, Belgium, DE (2008). [Google Scholar]
  28. ASTM D5970, Standard test method for deterioration of geotextiles from outdoor exposure. Am. Soc. Test. Mater, West Conshohocken, PA, USA (2021). [Google Scholar]
  29. ASTM G90, Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight. Am. Soc. Test. Mater, West Conshohocken, PA, USA (2023). [Google Scholar]
  30. ASTM D5819, Standard guide for selecting test methods for experimental evaluation of geosynthetic durability. Am. Soc. Test. Mater, West Conshohocken, PA, USA (2005). [Google Scholar]
  31. S. Sumi, N. Unnikrishnan, L. Mathew, Durability studies of surface-modified coir geotextiles. Geotext. Geomembr. 46(6): 699–706 (2018). [CrossRef] [Google Scholar]
  32. J.R. Carneiro, M. Morais, M.L. Lopes, Degradation of polypropylene geotextiles with different chemical stabilisations in marine environments. Constr. Build. Mater 165: 877–886 (2018). [CrossRef] [Google Scholar]
  33. M.G.A. Guimarães, D.M. Vidal, D.C. Urashima, C.A.C. Castro, Degradation of polypropylene woven geotextile: tensile creep and weathering. Geosynth. Int. 24(2): 213–223 (2017). [CrossRef] [Google Scholar]
  34. Y. Zhao, Z. Lu, H. Yao, H. Hu, X. Li, Y. Tang, A fast and precise methodology of creep master curve construction for geosynthetics based on stepped isothermal method (SIM). Geotext. Geomembr. 49(4): 952–962 (2021). [CrossRef] [Google Scholar]
  35. M. Pinho-Lopes, A.M. Paula, M.L. Lopes, Long-term response and design of two geosynthetics: effect of field installation damage. Geosynth. Int. 25(1): 98–117 (2018). [CrossRef] [Google Scholar]
  36. J.L.E. Dias Filho, P.C.A. Maia, G.C. Xavier, Spectrophotometry as a tool for characterizing durability of woven geotextiles. Geotext. Geomembr. 47(4): 577–585 (2019a). [CrossRef] [Google Scholar]
  37. J.L.E. Dias Filho, P.C.A. Maia, A Non-conventional Durability Test for Simulating Creep of Geosynthetics Under Accelerated Degradation. Int. J. of Geosynth. and Ground Eng. 7(65) (2021). [Google Scholar]
  38. J.R. Carneiro, P.J. Almeida, M.L. Lopes, Some synergisms in the laboratory degradation of a polypropylene geotextile. Constr. Build. Mater 73: 586–591 (2014). [CrossRef] [Google Scholar]
  39. J.R. Carneiro, M.L. Lopes, Natural weathering of polypropylene geotextiles treated with different chemical stabilisers. Geosynth. Int. 24(6):5 44–553 (2017). [Google Scholar]
  40. J.R. Carneiro, P.J. Almeida, M.L. Lopes, Laboratory evaluation of interactions in the degradation of a polypropylene geotextile in marine environments. Adv. Mater. Sci. Eng., 2018 Article Id 9182658 (2018). [CrossRef] [Google Scholar]
  41. J.L.E. Dias Filho, P.C.A. Maia, G.C. Xavier, A short-term model for extrapolating unconfined creep deformation data for woven geotextiles. Geotext. Geomembr., 47(6): 792–797 (2019b). [CrossRef] [Google Scholar]
  42. F. Almeida, D.M. Carlos, J.R. Carneiro, M.D.L. Lopes Resistance of geosynthetics against the isolated and combined effect of mechanical damage under repeated loading and abrasion. Materials 12(21): 3558 (2019). [Google Scholar]
  43. M.G.A. Guimarães, D.C. Urashima, C.A.C. Castro, M.L.C. Lopes Durability of a Polypropylene Woven Geotextile under Climatic and Chemical Agents. Mod. Environ. Sci. Eng. Academic Star Publishing Company. 1(4): 172–177 (2015). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.