Open Access
| Issue |
E3S Web Conf.
Volume 569, 2024
GeoAmericas 2024 - 5th Pan-American Conference on Geosynthetics
|
|
|---|---|---|
| Article Number | 07002 | |
| Number of page(s) | 8 | |
| Section | Mechanically Stabilized Earth (MSE) Walls 1 | |
| DOI | https://doi.org/10.1051/e3sconf/202456907002 | |
| Published online | 19 September 2024 | |
- AASHTO. LRFD Bridge Design Specifications. American Association of State Highway and Transportation Officials (AASHTO), 9th ed., Washington, D.C., USA (2020). [Google Scholar]
- FHWA. Design and Construction of Mechanically Stabilized Earth Walls and Reinforced Soil Slopes, Vol. I. National Highway Institute Federal Highway Administration U.S. Dept. of Transportation, Washington, D.C., USA (FHWA-NHI-10-024) (2009). [Google Scholar]
- CSA. Canadian Highway Bridge Design Code (CHBDC). CSA Standard S6-06. Canadian Standards Association (CSA), Toronto, Ontario, Canada, (2006). [Google Scholar]
- NCMA. Design Manual for Segmental Retaining Walls (3rd ed.). Nat. Concrete Masonry Association, Herndon, VA, USA, (2009). [Google Scholar]
- Allen, T.M., Christopher, B.R., Elias, V. and DiMaggio, J.D. Development of the Simplified Method for internal stability design of mechanically stabilized earth (MSE) walls. Report WA-RD 513.1, Washington State Department of Transporta-tion (WSDoT), Olympia, Wash., USA (2001). [Google Scholar]
- Allen T.M. and Bathurst R.J. Application of the Simplified Stiffness Method to design of reinforced soil walls. Journal of Geotechnical and Geoenvironmental Engineering, 144(5): 04018024 (2018). [CrossRef] [Google Scholar]
- Bathurst, R.J. Challenges and recent progress in the analysis, design and modelling of geosynthetic reinforced soil walls, Giroud Lecture, CD Proceedings of the 10th International Geosynthetics Conference, Berlin, 21–25 September 2014, 38 p. (2014) [Google Scholar]
- Bathurst, R.J., Walters, D., Vlachopoulos, N., Burgess, P. and Allen, T.M. Full scale testing of geosynthetic reinforced walls. Invited keynote paper, ASCE Special Publication No. 103, Advances in Transportation and Geoenvironmental Systems using Geosynthetics, Geo-Denver 2000, Denver, Colorado, pp. 201–217 (2000). [CrossRef] [Google Scholar]
- Bathurst, R.J., Vlachopoulos, N., Walters, D.L., Burgess, P.G. and Allen, T.M. The influence of facing rigidity on the performance of two geosynthetic reinforced soil retaining walls. Canadian Geotechnical Journal 43(12): 1225–1237 (2006). [CrossRef] [Google Scholar]
- Bathurst, R.J., Nernheim, A., Walters, D.L., Allen, T.M., Burgess, P. and Saunders, D. Influence of reinforcement stiff-ness and compaction on the performance of four geosynthetic reinforced soil walls. Geosynthetics International 16(1): 43–59, (2009). [CrossRef] [Google Scholar]
- Hatami, K. and Bathurst, R.J. Development and verification of a numerical model for the analysis of geosynthetic rein-forced soil segmental walls under working stress conditions. Canadian Geotechnical Journal 42(4): 1066–1085, (2005). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.