EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 619 (2025) E3S Web Conf., 619 (2025) 02007 References
Open Access
Issue
E3S Web Conf.
Volume 619, 2025
3rd International Conference on Sustainable Green Energy Technologies (ICSGET 2025)
Article Number 02007
Number of page(s) 13
Section Innovations in Power Systems and Grid Infrastructure
DOI https://doi.org/10.1051/e3sconf/202561902007
Published online 12 March 2025
  1. B. K. Bose, “Global Energy scenario and impact of power Electronics in 21st century,” IEEE Transactions on Industrial Electronics, vol. 60, no. 7, pp. 2638–2651, Jun. 2012, doi: 10.1109/tie.2012.2203771. [Google Scholar]
  2. Reddy, B. Nagi, et al. “Fuel Cell Based Ultra-Voltage Gain Boost Converter for Electric Vehicle Applications.” Transactions on Energy Systems and Engineering Applications 4.1 (2023): 68-90. [CrossRef] [Google Scholar]
  3. R. Y. Yamashita, F. L. Silva, F. M. Santiciolli, J. J. Eckert, F. G. Dedini, and L. C. A. Silva, “Comparison between two models of BLDC motor, simulation and data acquisition,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 2, Jan. 2018, doi: 10.1007/s40430-018-1020-0. [CrossRef] [Google Scholar]
  4. P. Dini and S. Saponara, “Cogging torque reduction in brushless motors by a nonlinear control technique,” Energies, vol. 12, no. 11, p. 2224, Jun. 2019, doi: 10.3390/en12112224. [CrossRef] [Google Scholar]
  5. J. Fang, H. Li, and B. Han, “Torque Ripple Reduction in BLDC torque motor with nonideal back EMF,” IEEE Transactions on Power Electronics, vol. 27, no. 11, pp. 4630–4637, Dec. 2011, doi: 10.1109/tpel.2011.2176143. [Google Scholar]
  6. Rex, CR Edwin Selva, et al. “Speed Control of BLDC Motor Using Trapezoidal Commutation & PWM Technique.” 2023 4th IEEE Global Conference for Advancement in Technology (GCAT). IEEE, 2023. [Google Scholar]
  7. R. Jabangwe, H. Edison, and A. N. Duc, “Software engineering process models for mobile app development: A systematic literature review,” Journal of Systems and Software, vol. 145, pp. 98–111, Aug. 2018, doi: 10.1016/j.jss.2018.08.028. [CrossRef] [Google Scholar]
  8. X. Li and P. Shamsi, “Model Predictive current control of switched reluctance motors with inductance Auto-Calibration,” IEEE Transactions on Industrial Electronics, vol. 63, no. 6, pp. 3934–3941, Nov. 2015, doi: 10.1109/tie.2015.2497301. [Google Scholar]
  9. Karthick, K., Ravivarman, S., Samikannu, R., Vinoth, K., & Sasikumar, B. (2021). Analysis of the Impact of Magnetic Materials on Cogging Torque in Brushless DC Motor. Advances in Materials Science and Engineering, 2021, 1–10. https://doi.org/10.1155/2021/5954967. [CrossRef] [Google Scholar]
  10. A. A. Rafiq, W. N. Rohman, and S. D. Riyanto, “Development of a Simple and Low-cost Smartphone Gimbal with MPU-6050 Sensor,” Journal of Robotics and Control (JRC), vol. 1, no. 4, Jan. 2020, doi: 10.18196/jrc.1428. [CrossRef] [Google Scholar]
  11. Kalyan, CH Naga Sai, et al. “Performance Improvement in Multi Area Diverse Source Interconnected Power System under IDDN Controller with AC-DC Line.” 2024 International Conference on Integrated Circuits and Communication Systems (ICICACS). IEEE, 2024. [Google Scholar]
  12. Kalyan, CH Naga Sai, et al. “Performance Improvement in Multi Area Diverse Source Interconnected Power System under IDDN Controller with AC-DC Line.” 2024 International Conference on Integrated Circuits and Communication Systems (ICICACS). IEEE, 2024. [Google Scholar]
  13. Liu, Fei, Dajun Lei, and Xiangyan He. “Design of DC Motor Operation Monitoring System Based on MATLAB GUI.” Journal of Automation, vol. 48, 2014, pp. 14-18. [Google Scholar]
  14. Kanagarathinam, K., Manikandan, R., & S, R. (2023). Impact of Stator Slot Shape on Cogging Torque of BLDC Motor. International Journal of Electrical and Electronics Research, 11(1), 54–60. https://doi.org/10.37391/ijeer.110108 [CrossRef] [Google Scholar]
  15. Pongiannan, R. K., Murugaperumal Krishnamoorthy, Suresh Srinivasan, M. Chandrasekaran, C. Bharatiraja, Praveen Kumar, Santhan Kumar Cherukuri, Thanikanti Sudhakar Babu, and Hassan Haes Alhelou. “Cost-effective energy conservation techniques for textile spinning mills.” IEEE Access 10 (2022): 49839-49852. [CrossRef] [Google Scholar]
  16. C. Pavithra, W. S. Melvin, S. R. Prakash, R. C. M. Chinnaa, and R. R. Krishna, “Automated speed control and performance analysis of BLDC and servo motors using fuzzy logic,” AIP Conference Proceedings, vol. 2455, p. 020007, Jan. 2022, doi: 10.1063/5.0101183. [CrossRef] [Google Scholar]
  17. N. B.-K. Lee, N. T.-H. Kim, and M. Ehsani, “On the feasibility of four-switch three- phase BLDC motor drives for low cost commercial applications: topology and control,” IEEE Transactions on Power Electronics, vol. 18, no. 1, pp. 164–172, Jan. 2003, doi: 10.1109/tpel.2002.807125. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.