Open Access
Issue
E3S Web Conf.
Volume 619, 2025
3rd International Conference on Sustainable Green Energy Technologies (ICSGET 2025)
Article Number 02011
Number of page(s) 19
Section Innovations in Power Systems and Grid Infrastructure
DOI https://doi.org/10.1051/e3sconf/202561902011
Published online 12 March 2025
  1. G. M. Pradeep, T. Sankaramoorthy, M. Elango, T. N. Kumar, R. Girimurugan, Structural analysis and mechanical properties of thermal battery by flexible phase change materials [PCM]. Materials Today: Proceedings. 56, 3196 (2022). [CrossRef] [Google Scholar]
  2. Z. Gao, F. Deng, D. Yan, H. Zhu, Z. An, P. Sun, Thermal performance of thermal management system coupling composite phase change material to water cooling with double s-shaped micro-channels for prismatic lithium-ion battery. J Energy Storage. 45, (2022). [Google Scholar]
  3. Z. Liu, B. Wang, S. Chen, P. Li, Lithium-ion battery pack thermal management under high ambient temperature and cyclic charging-discharging strategy design. J Energy Storage. 80, (2024). [Google Scholar]
  4. N. Napa, M. K. Agrawal, B. Tamma, Phase change material properties identification for the design of efficient thermal management system for cylindrical Lithium-ion battery module. J Energy Storage. 99, (2024). [Google Scholar]
  5. Srilakshmi, Koganti, Sravanthy Gaddameedhi, Subba Reddy Borra, Praveen Kumar Balachandran, Ganesh Prasad Reddy, Aravindhababu Palanivelu, Shitharth Selvarajan. Optimal design of solar/wind/battery and EV fed UPQC for power quality and power flow management using enhanced most valuable player algorithm. Frontiers in Energy Research 11, 1342085 (2024). [CrossRef] [Google Scholar]
  6. V. Saxena, A. Kumar, A. Sharma, S. K. Sahu, S. I. Kundalwal, Thermal Analysis of a Li-Ion Battery Coupled with Phase Change Material (Paraffin Wax RT-35) filled with Copper Metal Foam: A Numerical Study. in American Society of Mechanical Engineers, Power Division (Publication). POWER 4, (2022). [Google Scholar]
  7. Murugesan, Palpandian, Prince Winston David, Rajvikram Madurai Elavarasan, G. M. Shafiullah, Praveen Kumar Balachandran. A jigsaw puzzle-based reconfiguration technique for enhancing maximum power in partially shaded hybrid photovoltaic array implementation. In Green energy systems. 223 (2023). [Google Scholar]
  8. N. Napa, M. K. Agrawal, B. Tamma, Design of novel thermal management system for Li-ion battery module using metal matrix based passive cooling method. J Energy Storage. 73, (2023). [Google Scholar]
  9. C. Kang, J. Yang, X. Yuan, C. Qiu, Y. Cai, A novel multilayer composite structure based battery thermal management system. Front Energy Res. 11, (2023). [Google Scholar]
  10. Z. Fan, Y. Fu, R. Gao, S. Liu, Investigation on heat transfer enhancement of phase change material for battery thermal energy storage system based on composite triply periodic minimal surface. J Energy Storage. 57, (2023). [Google Scholar]
  11. Y. Zhang, S. Zhao, T. Zhou, H. Wang, S. Li, Y. Yuan, Z. Ma, J. Wei, X. Zhao, Experimental and Numerical Investigations of a Thermal Management System Using Phase-Change Materials and Forced-Air Cooling for High-Power Li-Ion Battery Packs. Batteries. 9, (2023). [Google Scholar]
  12. C. Xie, Nano-enhanced phase change material using salt hydrate and cooper nanoparticles for battery thermal management system: Buoyancy-driven approach. J Energy Storage. 74, (2023). [Google Scholar]
  13. Z. Fan, R. Gao, S. Liu, Thermal conductivity enhancement and thermal saturation elimination designs of battery thermal management system for phase change materials based on triply periodic minimal surface. Energy. 259, (2022). [Google Scholar]
  14. Ganesan, Sakthivel, Prince Winston David, Pravin Murugesan, Praveen Kumar Balachandran. Solar photovoltaic system performance improvement using a new fault identification technique. Electric Power Components and Systems. 52, 42 (2024). [CrossRef] [Google Scholar]
  15. R. Kumar, A. Mitra, T. Srinivas, Role of nano-additives in the thermal management of lithium-ion batteries: A review. J Energy Storage. 48, (2022). [Google Scholar]
  16. R. Girimurugan, A. Ranjithkumar, A. Yasminebegum, SK Ahammad, Sameer Ranjan Biswal, G. Ravivarman, Mathanbabu Mariappan, D. Thirumalaikumarasamy. Investigating Electrical, Optical and Structural Characteristics of Cu-Doped TiO2 Nanostructured Thin Films Synthesized by Innovative Sol-Gel Process. International Journal of Vehicle Structures & Systems. 16, (2024). [Google Scholar]
  17. A. Mitra, R. Kumar, D. K. Singh, Z. Said, Advances in the improvement of thermal- conductivity of phase change material-based lithium-ion battery thermal management systems: An updated review. J Energy Storage. 53, (2022). [Google Scholar]
  18. U. Moralı, A numerical and statistical study to determine the effect of thermophysical properties of phase change material for lithium-ion battery thermal management. Numeri Heat Transf A Appl. (2023). [Google Scholar]
  19. A. R. Bais, D. G. Subhedar, S. Panchal, Critical thickness of nano-enhanced RT-42 paraffin based battery thermal management system for electric vehicles: A numerical study. J Energy Storage. 52, (2022). [Google Scholar]
  20. Prasanth Ponnusamy, S. Seenivasan, G. Ravivarman, K. Sathiyasekar, Ramasamy Girimurugan, Experimental Analysis of Phase Change Materials Supported with Hemp- Stem-Derived Biochar for Enhanced Solar-Thermal Energy Conversion and Storage. Engineering Materials for Efficient Energy Storage and Conversion. 177 (2024). [Google Scholar]
  21. X. Dai, P. Ping, D. Kong, X. Gao, Y. Zhang, G. Wang, R. Peng, Heat transfer enhanced inorganic phase change material compositing carbon nanotubes for battery thermal management and thermal runaway propagation mitigation. Journal of Energy Chemistry. 89, 226 (2024). [CrossRef] [Google Scholar]
  22. T. Yang, S. Su, Q. Xin, J. Zeng, H. Zhang, X. Zeng, Xiao, Thermal Management of Lithium-Ion Batteries Based on Honeycomb-Structured Liquid Cooling and Phase Change Materials. Batteries. 9, (2023). [Google Scholar]
  23. L. K. Pratama, S. P. Santosa, T. Dirgantara, D. Widagdo, Design and Numerical Analysis of Electric Vehicle Li-Ion Battery Protections Using Lattice Structure Undergoing Ground Impact. World Electric Vehicle Journal. 13, (2022). [Google Scholar]
  24. Anandha Moorthy Appusamy, Senthil Kumar Laxmanan, Madheswaran Subramaniyan, Pon Maheskumar, K. Suresh Kumar, R. Girimurugan, A Critical Review on Polymer Composites Reinforced with Artificial Fibers Using Fused Deposition Modelling. J. Environ. Nanotechnol. 13, 440 (2024). [CrossRef] [Google Scholar]
  25. V.-T. Huynh, K. Chang, S.-W. Lee, One-dimensional and three-dimensional numerical investigations of thermal performance of phase change materials in a lithium-ion battery. Energies (Basel). 14, (2021). [Google Scholar]
  26. C. Hu, H. Li, Y. Wang, X. Hu, D. Tang, Experimental and numerical investigations of lithium-ion battery thermal management using flat heat pipe and phase change material. J Energy Storage. 55, (2022). [Google Scholar]
  27. A. Dewangan A. K. Shukla, Enhancing Li-Ion Electric Vehicle Battery Performance: Analysis of Advanced Thermal Management Cooling Strategies with Phase Change Material. Energy Technology. 5, (2024). [Google Scholar]
  28. H. Ren, C. Dang, L. Yin, Z. Chen, Optimization research on battery thermal management system based on PCM and mini-channel cooling plates. Case Studies in Thermal Engineering. 53, (2024). [Google Scholar]
  29. Krishnamoorthy, Murugaperumal, S. Devakirubakaran, Arulselvi Ramasamy, and Suresh Srinivasan. “Renewable green hydrogen as a future power for electric vehicles: a perspective.” In Renewable Energy for Plug-In Electric Vehicles, pp. 95-110. Elsevier, 2024. [Google Scholar]
  30. S. Sudhakaran, M. Terese, Y. Mohan, A. D. Thampi, S. Rani, Influence of various parameters on the cooling performance of battery thermal management systems based on phase change materials. Appl Therm Eng. 222, (2023). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.