Open Access
| Issue |
E3S Web Conf.
Volume 628, 2025
2025 7th International Conference on Environmental Prevention and Pollution Control Technologies (EPPCT 2025)
|
|
|---|---|---|
| Article Number | 02017 | |
| Number of page(s) | 7 | |
| Section | Exploration of Dynamic Changes in Environmental Ecosystems and Protection Strategies | |
| DOI | https://doi.org/10.1051/e3sconf/202562802017 | |
| Published online | 16 May 2025 | |
- Katharina B, Josef-Peter S, Rupert J. B. (2022) Digital battery passports to enable circular and sustainable value chains_ Conceptualization and use cases. Journal of Cleaner Production. 353(1-15) [Google Scholar]
- Official Journal of the European Union. Proposal for a regulation of the European Parliament and of the council establishing a framework for setting ecodesign requirements for sustainable products and repealing Directive 2009/125/EC (2022). [Google Scholar]
- Official Journal of the European Union. Regulation (EU) 2023/1542 of European parliament and of the council of 12 July 2023 concerning batteries and waste batteries, amending Directive 2008/98/EC and Regulation (EU) 2019/1020 and repealing Directive2006/66/EC (2023). [Google Scholar]
- Official Journal of the European Union. Proposal for a regulation of European parliament and of the council on circularity requirements for vehicle design and on management of end-of-life vehicles, amending Regulations (EU) 2018/858 and 2019/1020 and repealing Directives 2000/53/EC and 2005/64/EC : Regulation proposal 2023/0284 (COD) (2023) [Google Scholar]
- Official Journal of the European Union. Regulation (EU) 2024/1257 of European parliament and of the council of 24 April 2024 on type-approval of motor vehicles and engines and of systems, components and separate technical units intended for such vehicles, with respect to their emissions and battery durability (Euro 7),amending Regulation (EU) 2018/858 of the European Parliament and of the Council and repealing Regulations (EC) No 715/2007 and (EC) No 595/2009 of the European Parliament and of the Council, Commission Regulation (EU) No 582/2011,Commission Regulation (EU) 2017/1151, Commission Regulation (EU) 2017/2400 and Commission Implementing Regulation (EU) 2022/1362: Regulation (EU) 2024/1257 (2024) [Google Scholar]
- Johanna H B*, Felipe C A B, Christoph H A B. Derivation of requirements for life cycle assessment-related information to be integrated in digital battery passports [C], 31st CIRP Conference on Life Cycle Engineering (LCE 2024) 2024:300–305 [Google Scholar]
- Zhang A. Digital product passport for sustainable and circular supply chain management: a structured review of use cases [J]. International Journal of Logistics Research and Applications, 2024:1–28 [Google Scholar]
- Kristiina V, Leila M S, et al. Matching Circularity Improvements and Digital Product Passport Viewpoints: Insights from Three Industrial Case Studies [C]// Procedia Computer Science, 6th International Conference on Industry 4.0 and Smart Manufacturing. 2025,253:1720–1729 [Google Scholar]
- Antonia P, Martin P, Josef-Peter S, Johann B, Jakob K, Rupert J. Baumgartnerb(2024)Conceptualization of a digital product passport to enable circular and sustainable automotive value chains - the combustion engine use case: 169–174 [Google Scholar]
- Josef P S, Rupert J. Barriers to sustainable and circular product design-A theoretical and empirical prioritisation in the European automotive industry [J]. Journal of Cleaner Production 2024,434:1–15 [Google Scholar]
- Katharina B. Data requirements and availabilities for a digital battery passport-A value chain actor perspective [J]. Cleaner Production Letters, 2023, 4:1–23 [Google Scholar]
- Johanna H B. Derivation of requirements for life cycle assessment-related information to be integrated in digital battery passports [C], 31st CIRP Conference on Life Cycle Engineering (LCE 2024) 2024:300–305 [Google Scholar]
- Lai X X(2024)Research on the Standard System of Automobile Power BatteryResearch on the Standard System of Automobile Power Battery Passport in China.China Auto (3–8) [Google Scholar]
- Xie X O, Liang C H The GS1 standard helps the EU "Product Digital Passport" improve data transparency and interoperability of barcodes and information systems [J]. BAR CODE & INFORMATION SYSTEM, 2023 (6):12–15 [Google Scholar]
- Zhao S Y etal. Analysis on the content related to textiles of "European Green Deal" and China’stextile industry’scountermeasure. YINRAN. 2024 (83–95) [Google Scholar]
- Paul K F Wan a, Shanshan J Enabling a dynamic information flow in digital product passports duringproduct use phase_ A literature review and proposed framework. Sustainable Production and Consumption. 2025:362–374 [Google Scholar]
- Katharina B a, Rupert J. Baumgartner a, Martin W b, Johann B b, Josef-Peter S a Factors of digital product passport adoption to enable circular information30th CIRP Life Cycle Engineering Conference[C](2023) 528–533 [Google Scholar]
- Connecting Producers and Recyclers-A Digital Product Passport Concept and Implementation Suitable for End-of-Life Management. 31st CIRP Conference on Life Cycle Engineering (LCE 2024) (2024) 831–836 [Google Scholar]
- Sultan Ç a, Deepika R b, Meliha H b, Ad S a, Vincent G a. Data requirements and availabilities for material passports_ A digitally enabled framework for improving the circularity of existing building Sustainable Production and Consumption(2023) 422–437 [Google Scholar]
- Li Q N, Wang Y X. Research on Quality Management of Building Material Supply Chain Based on Blockchain. Journal of Engineering Management 2024 (135–140) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.