Open Access
Issue |
E3S Web Conf.
Volume 631, 2025
6th International Conference on Multidisciplinary Design Optimization and Applications (MDOA 2024)
|
|
---|---|---|
Article Number | 02003 | |
Number of page(s) | 5 | |
Section | Materials and Optimal Design | |
DOI | https://doi.org/10.1051/e3sconf/202563102003 | |
Published online | 26 May 2025 |
- A. H. Hafez, M. El-Rich, T. Liu, N. Jomha, and A. Schiffer, ‘Design of a lightweight universal talus implant using topology optimization’, Frontiers in Bioengineering and Biotechnology, vol. 11, Aug. 2023, doi: 10.3389/fbioe.2023.1228809. [CrossRef] [Google Scholar]
- I. El Khadiri, M. Zemzami, N.-Q. Nguyen, M. Abouelmajd, N. Hmina, and S. Belhouideg, ‘Topology optimization methods for additive manufacturing: a review’, International Journal for Simulation and Multidisciplinary Design Optimization, vol. 14, p. 12, Oct. 2023, doi: 10.1051/smdo/2023015. [CrossRef] [EDP Sciences] [Google Scholar]
- M. Peto, J. García-Ávila, C. A. Rodriguez, H. R. Siller, J. V. L. da Silva, and E. Ramírez-Cedillo, ‘Review on structural optimization techniques for additively manufactured implantable medical devices’, Frontiers in Mechanical Engineering, vol. 10, Mar. 2024, doi: 10.3389/fmech.2024.1353108. [CrossRef] [Google Scholar]
- S. Miramini, K. L. Fegan, N. C. Green, D. M. Espino, L. Zhang, and L. E. J. Thomas-Seale, ‘The status and challenges of replicating the mechanical properties of connective tissues using additive manufacturing’, Journal of the Mechanical Behavior of Biomedical Materials, vol. 103, p. 103544, Mar. 2020, doi: 10.1016/j.jmbbm.2019.103544. [CrossRef] [PubMed] [Google Scholar]
- J. Eschweiler et al, ‘Anatomy, Biomechanics, and Loads of the Wrist Joint’, Life, vol. 12, no. 2, p. 188, Jan. 2022, doi: 10.3390/life12020188. [CrossRef] [PubMed] [Google Scholar]
- Anabela Faria, ‘Additive Manufacturing of Custom-Fit Orthoses for the Upper Limb’. . [Google Scholar]
- D. Popescu, F. Baciu, D. Vlăsceanu, R. Marinescu, and D. Lăptoiu, ‘Investigations on the Fatigue Behavior of 3D-Printed and Thermoformed Polylactic Acid Wrist–Hand Orthoses’, Polymers, vol. 15, no. 12, p. 2737, Jun. 2023, doi: 10.3390/polym15122737. [CrossRef] [PubMed] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.