Open Access
| Issue |
E3S Web Conf.
Volume 645, 2025
The 1st International Conference on Green Engineering for Sustainable Future (ICoGESF 2025)
|
|
|---|---|---|
| Article Number | 01010 | |
| Number of page(s) | 10 | |
| Section | Green Engineering and Sustainable Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202564501010 | |
| Published online | 28 August 2025 | |
- M. Bodaghi and A. Zolfagharian, 4D printing principles and manufacturing. Smart Materials in Additive Manufacturing, 1, 1-17 (2022) DOI: 10.1016/B978-0-12-824082-3.00014-3 [Google Scholar]
- Y. S. Alshebly, M. Nafea, M. S. Mohamed Ali, and H. A. F. Almurib, Review on recent advances in 4D printing of shape memory polymers. Eur. Polym. J. 159, 110708 (2021) DOI: 10.1016/j.eurpolymj.2021.110708. [Google Scholar]
- Y. S. Alshebly et al., Bioinspired Pattern-Driven Single-Material 4D Printing for Self-Morphing Actuators. Sustainability 16, 10141 (2022) DOI: 10.3390/su141610141 [Google Scholar]
- M. G. Sahini, Polylactic acid (PLA)-based materials: a review on the synthesis and drug delivery applications. Emergent Mater. 6, 1461-1479 (2023) DOI: 10.1007/s42247-023-00551-7 [Google Scholar]
- K. Saptaji et al., Enhancing shape-recovery ratio of 4D printed polylactic acid (PLA) structures through processing parameter optimization. Prog. Addit. Manuf., (2023) DOI: 10.1007/s40964-023-00551-3 [Google Scholar]
- M. Barletta, A. Gisario, and M. Mehrpouya, 4D printing of shape memory polylactic acid (PLA) components: Investigating the role of the operational parameters in fused deposition modelling (FDM). J. Manuf. Process. 61, 473-480 (2021) DOI: 10.1016/j.jmapro.2020.11.036 [Google Scholar]
- M. Eryildiz, A. Karakus, and M. Altan Eksi, Development and Characterization of PLA/PCL Blend Filaments and 3D Printed Scaffolds. J. Mater. Eng. Perform., (2024) DOI: 10.1007/s11665-024-10247-6 [Google Scholar]
- S. Ma et al., 4D printing of PLA/PCL shape memory composites with controllable sequential deformation. Bio-Des. Manuf. 4, 867-878 (2021) DOI: 10.1007/s42242-021-00151-6 [Google Scholar]
- F. Fahma, Potential Application of Nanocellulose for Filaments Production: A Review. (2020). DOI: 10.22052/JNS.2020.03.011 [Google Scholar]
- S. Mohan Bhasney, A. Kumar, and V. Katiyar, Microcrystalline cellulose, polylactic acid and polypropylene biocomposites and its morphological, mechanical, thermal and rheological properties. Compos. Part B Eng. 184, 107717 (2020) [Google Scholar]
- D. Krapež Tomec, M. Schöflinger, J. Leßlhumer, U. Gradišar Centa, J. Žigon, and M. Kariž, The Effects of Microcrystalline Cellulose Addition on the Properties of Wood-PLA Filaments for 3D Printing. Polymers 16, 836 (2024) [Google Scholar]
- A. E. Engelbrecht-Wiggans and A. L. Forster, Analysis of strain correction procedures for single fiber tensile testing. Compos. Part Appl. Sci. Manuf. 167, 107411 (2023). DOI: 10.1016/j.compositesa.2022.107411 [Google Scholar]
- C. M. González-Henríquez, F. E. Rodriguez-Umanzor, M. A. Sarabia-Vallejos, and J. Rodriguez-Hernandez, 4D Printing Using Multifunctional Polymeric Materials: A Review. Encyclopedia of Materials: Plastics and Polymers. 17-36 (2022) [Google Scholar]
- I. Plamadiala, C. Croitoru, M. A. Pop, and I. C. Roata, Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments. Polymers 17, 191 (2025) DOI: 10.3390/polym17020191 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.