Preliminary Research on Tensile Properties of Vulcanized EPDM-Rubber Joint for Application in Inflatable Rubber Dam

Open Access

Issue		E3S Web Conf. Volume 645, 2025 The 1^st International Conference on Green Engineering for Sustainable Future (ICoGESF 2025)


Article Number		02006
Number of page(s)		9
Section		Smart and Sustainable Infrastructure
DOI		https://doi.org/10.1051/e3sconf/202564502006
Published online		28 August 2025

Valentini L., Bittolo Bon S., Lopez-Manchado M.A., Verdejo R., Pappalardo L., Bolognini A., et al. Synergistic effect of graphene nanoplatelets and carbon black in multifunctional EPDM nanocomposites. Compos Sci Technol 2016;128:123-30. https://doi.org/10.1016/j.compscitech.2016.03.024 [CrossRef] [Google Scholar]
Li C., Wang Y., Yuan Z., Ye L. Construction of sacrificial bonds and hybrid networks in EPDM rubber towards mechanical performance enhancement. Appl Surf Sci 2019;484:616-27. https://doi.org/10.1016/j.apsusc.2019.04.064 [Google Scholar]
Costa N.L., Hiranobe C.T., Cardim H.P., Dognani G., Sanchez J.C., Carvalho J.A.J., et al. A Review of EPDM (Ethylene Propylene Diene Monomer) Rubber-Based Nanocomposites: Properties and Progress. Polymers (Basel) 2024;16:1720. https://doi.org/10.3390/polym16121720 [Google Scholar]
Restrepo-Zapata N.C., Osswald T.A., Hernández-Ortiz J.P. Vulcanization of EPDM rubber compounds with and without blowing agents: Identification of reaction events and TTT-diagram using DSC data. Polym Eng Sci 2015;55:2073-88. https://doi.org/10.1002/pen.24049 [Google Scholar]
Bavi O., Bavi N., Shishesaz M. Geometrical Optimization of the Overlap in Mixed Adhesive Lap Joints. J Adhes 2013;89:948-72. https://doi.org/10.1080/00218464.2013.782813 [Google Scholar]
da Silva L.F.M., Öchsner A., Adams R.D., editors. Handbook of Adhesion Technology. Cham: Springer International Publishing; 2018. https://doi.org/10.1007/978-3-319-55411-2 [Google Scholar]
Giannis S., Adams RD. Failure of elastomeric sealants under tension and shear: Experiments and analysis. Int J Adhes Adhes 2019;91:77-91. https://doi.org/10.1016/j.ijadhadh.2019.03.007 [Google Scholar]
Shishesaz M., Hosseini M. Effects of joint geometry and material on stress distribution, strength and failure of bonded composite joints: an overview. J Adhes 2020;96:1053-121. https://doi.org/10.1080/00218464.2018.1554483 [Google Scholar]
da Silva L.F., Adams, R. The strength of adhesively bonded T-joints. Int J Adhes Adhes 2002;22:311-5. https://doi.org/10.1016/S0143-7496(02)00009-X [Google Scholar]
Her S.-C., Chan C.-F. Interfacial Stress Analysis of Adhesively Bonded Lap Joint. Materials (Basel) 2019;12:2403. https://doi.org/10.3390/ma12152403 [Google Scholar]
International A. Test Methods for Vulcanized Rubber and Thermoplastic ElastomersTension 2021. https://doi.org/10.1520/D0412-16R21 [Google Scholar]
Monteiro J., Salgado R., Rocha T., Pereira G., Marques E., Carbas R., et al. Effect of Adhesive Type and Overlap Length on the Mechanical Resistance of a Simple Overlap Adhesive Joint. UPorto J Eng 2021;7:1-12. https://doi.org/10.24840/2183-6493_007.003_0001 [Google Scholar]
Abbasi M., Ciardiello R., Goglio L. Experimental Study on the Effect of Bonding Area Dimensions on the Mechanical Behavior of Composite Single-Lap Joint with Epoxy and Polyurethane Adhesives. Appl Sci 2023;13:7683. https://doi.org/10.3390/app13137683 [Google Scholar]
Luo H., Yan Y., Zhang T., Liang Z. Progressive failure and experimental study of adhesively bonded composite single-lap joints subjected to axial tensile loads. J Adhes Sci Technol 2016;30:894-914. https://doi.org/10.1080/01694243.2015.1131806 [Google Scholar]
Masmanidis I.T., Philippidis T.P. Progressive damage modeling of adhesively bonded lap joints. Int J Adhes Adhes 2015;59:53-61. https://doi.org/10.1016/j.ijadhadh.2015.02.001 [Google Scholar]
Özel A., Temiz Ş., Aydin M.D. Effect of overlap length on durability of joints bonded with a pressure-sensitive adhesive. J Adhes Sci Technol 2005;19:57-71. https://doi.org/10.1163/1568561053066936 [Google Scholar]
Purnomo H., Soemardi T., Budiono H., Salim A., Permana S., Ibadi M. Investigation of Surface Treatment of Single Lap Bonded Joint Strength on CFRP and Aluminum. Semin. Nas. Tah. Tek. Mesin XXII 2024, Depok, Indonesia: Badan Kerja Sama Teknik Mesin Indonesia; 2025, p. 427-31. https://doi.org/10.71452/590762 [Google Scholar]
Broughton W.R., Gower M.R.L. Preparation and testing of adhesive joints. Teddington, UK: 2023. https://doi.org/10.47120/npl.mgpg47 [Google Scholar]
Askarinejad S., Martínez-Pañeda E., Cuesta I.I., Fleck N. Mode II fracture of an MMA adhesive layer: Theory versus experiment. Eur J Mech - A/Solids 2021;86:104133. https://doi.org/10.1016/j.euromechsol.2020.104133 [Google Scholar]
Akrami R., Anjum S., Fotouhi S., Boaretto J., de Camargo F.V., Fotouhi M. Investigating the Effect of Interface Morphology in Adhesively Bonded Composite Wavy-Lap Joints. J Compos Sci 2021;5:32. https://doi.org/10.3390/jcs5010032 [Google Scholar]
Srinivasan D.V., Ravichandran V., Idapalapati S. Failure analysis of GFRP single lap joints tailored with a combination of tough epoxy and hyperelastic adhesives. Compos Part B Eng 2020;200:108255. https://doi.org/10.1016/j.compositesb.2020.108255 [Google Scholar]
Su B., Liu S., Zhang P., Wu J., Wang Y. Mechanical properties and failure mechanism of overlap structure for cord-rubber composite. Compos Struct 2021;274:114350. https://doi.org/10.1016/j.compstruct.2021.114350. [Google Scholar]
Zotti A., Zuppolini S., Zarrelli M., Borriello A. Fracture Toughening Mechanisms in Epoxy Adhesives. Adhes. - Appl. Prop., InTech; 2016. https://doi.org/10.5772/65250. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.