Open Access
| Issue |
E3S Web Conf.
Volume 645, 2025
The 1st International Conference on Green Engineering for Sustainable Future (ICoGESF 2025)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 12 | |
| Section | Smart and Sustainable Infrastructure | |
| DOI | https://doi.org/10.1051/e3sconf/202564502007 | |
| Published online | 28 August 2025 | |
- Dzaky, T. Prahasto, and O. Kurdi, “Analysis of double wishbone suspension on vehicle behavior using multi-body dynamics analysis method,” J. Mech. Eng. S-1, vol. 10, no. 3, 2022. [Google Scholar]
- J. Gonera, J. Napiórkowski, and K. Ciborowski, “Influence of the load distribution and sizes on the wheel geometry in passenger cars,” Communications - Sci. Lett. Univ. Žilina, vol. 23, no. 1, pp. B1-B12, 2021, DOI: 10.26552/COM.C.2021.1.B1-B12. [Google Scholar]
- D. Arrahman, “Reducing the camber thrust by utilizing the lateral force through the link bar mechanism to improve the car’s stability during cornering,” Dept. Mech. Eng., Sepuluh Nopember Inst. Technol., 2024. [Google Scholar]
- A. Awasthi, “Design and analysis of double wishbone suspension system for SUV,” Int. Res. J. Eng. Technol. (IRJET), 2021. [Google Scholar]
- R. Lin, X. Zhan, and X. Li, “Topology optimisation design of automotive suspension control arm,” Eng. Rep., vol. 7, 2025, Art no. e70188, DOI: 10.1002/eng2.70188. [Google Scholar]
- M. Z. Khan et al., “Mechanical performance enhancement of AISI 4140 via multistep rolled forging,” Mater. Today: Proc., vol. 72, pp. 208-215, 2023, DOI: 10.1016/j.matpr.2023.01.229. [Google Scholar]
- Gunawan et al., “Mesh quality optimization in nonlinear FEM simulation of automotive components,” J. Adv. Mech. Eng. Technol., vol. 12, no. 2, pp. 55-63, 2021. [Google Scholar]
- S. P. Sharma, K. R. Pillai, and A. Ghosh, “Comparative study on mechanical properties of AISI 4140 treated by various heat processes,” J. Mater. Eng. Perform., vol. 32, pp. 1124-1131, 2023, DOI: 10.1007/s11665-023-07733-z. [Google Scholar]
- N. Ahmed, S. R. Ali, and M. Tariq, “Enhanced mechanical properties of AISI 4140 steel using controlled forging sequences,” Mater. Today: Proc., vol. 76, pp. 1902-1908, 2024, DOI: 10.1016/j.matpr.2024.02.198. [Google Scholar]
- H. Wang, L. Zhang, and Y. Chen, “Design principles and fatigue analysis of gear systems in automotive applications,” Automotive Eng. J., vol. 18, no. 1, pp. 13-24, 2021. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.