Open Access
| Issue |
E3S Web Conf.
Volume 648, 2025
International Conference on Civil, Environmental and Applied Sciences (ICCEAS 2025)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 11 | |
| Section | Applied Sciences | |
| DOI | https://doi.org/10.1051/e3sconf/202564803002 | |
| Published online | 08 September 2025 | |
- O. Baarimah, W. S. Alaloul, M. S. Liew, S. O. Baarimah, M. A. Musarat, and A. A. Bin Mokaizh, “A bibliometric review of research trends on Kenaf fiber reinforced concrete,” in Construction Technologies and Architecture, 2023. [Google Scholar]
- M. Benedict, H. Zhang, and C. Wang, “Advances in thermoplastic resin systems for high-performance composites,” Composite Materials Reviews, vol. 32, no. 4, pp. 213–228, 2019. [Google Scholar]
- S. K. Bhudolia, G. Gohel, J. Kantipudi, K. F. Leong, and P. Gerard, “Mechanical performance and damage mechanisms of thin rectangular carbon/ Elium® tubular thermoplastic composites under flexure and low-velocity impact,” Thin-Walled Struct., vol. 165, no. 107971, p. 107971, 2021. [Google Scholar]
- M. Bonomo, B. Taheri, L. Bonandini, S. Castro-Hermosa, T. M. Brown, and M. Zanetti, “Thermosetting polyurethane resins as low-cost, easily scalable, and effective oxygen and moisture barriers for perovskite solar cells,” ACS Appl Mater Interfaces, vol. 12, no. 49, pp. 54862–54875, 2020. [Google Scholar]
- Y. Chang and J. K. Lees, “Recent development in thermoplastic composites: A review of matrix systems and processing methods,” J. Thermoplast. Compos. Mater., vol. 1, no. 3, pp. 277–296, 1988. [Google Scholar]
- J. Chen, Y. Liu, and H. Li, “Resin technology: A critical review of developments in composite materials,” Journal of Polymer Science, vol. 45, no. 12, pp. 897–910, 2018. [Google Scholar]
- S. Fakhreddini-Najafabadi, M. Torabi, and F. Taheri-Behrooz, “Nanoclay role in improving compression after impact strength of the carbon/epoxy composites,” J. Compos. Mater., vol. 57, no. 17, pp. 2717–2737, 2023. [Google Scholar]
- F. Fang, S. Ran, Z. Fang, P. Song, and H. Wang, “Improved flame resistance and thermomechanical properties of epoxy resin nanocomposites from functionalized graphene oxide via self-assembly in water,” Compos B Eng, vol. 165, pp. 406–416, 2019. [Google Scholar]
- S. Gao, P. Kumar, and T. Liu, “Multifunctional resins for high-strength composites: Challenges and opportunities,” Advanced Materials Research, vol. 67, no. 8, pp. 455–469, 2023. [Google Scholar]
- S. H. Ghaffar, M. Fan, and J. Corker, “Comparative analysis of thermosetting and thermoplastic resins in composite applications,” Materials Today, vol. 49, no. 7, pp. 251–263, 2022. [Google Scholar]
- W. Guo, S. Nie, E. N. Kalali, X. Wang, W. Wang, and W. Cai, “Construction of SiO2@ UiO-66 core-shell microarchitectures through covalent linkage as flame retardant and smoke suppressant for epoxy resins,” Compos B Eng, 2019. [Google Scholar]
- S. Huo, P. Song, B. Yu, S. Ran, V. S. Chevali, and L. Liu, “Phosphorus-containing flame retardant epoxy thermosets: recent advances and future perspectives,” Prog Polym Sci, 2021. [Google Scholar]
- J. Hwalla, J. Bawab, H. El-Hassan, F. Abu Obaida, and T. El-Maaddawy, “Scientometric analysis of global research on the utilization of geopolymer composites in construction applications,” Sustainability, vol. 15, no. 14, p. 11340, 2023. [Google Scholar]
- H. Kargarzadeh et al., “Recent developments on nanocellulose reinforced polymer nanocomposites: A review,” Polymer (Guildf.), vol. 132, pp. 368–393, 2017. [Google Scholar]
- M. Khosroupour Arabi and N. Kordani, “3D-printing of Continuous Fiber: A review of processes, materials and properties,” Polymer-Plastics Technology and Materials, vol. 62, no. 12, pp. 1525–1559, 2023. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.