Open Access
| Issue |
E3S Web Conf.
Volume 674, 2025
The 14th Engineering International Conference “Achieving Sustainability through Digital Transformation and Technology Development” (EIC 2025)
|
|
|---|---|---|
| Article Number | 10001 | |
| Number of page(s) | 15 | |
| Section | Industrial and Manufacturing Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202567410001 | |
| Published online | 11 December 2025 | |
- S. Mikkili and A. K. Panda, "SHAF for mitigation of current harmonies using p-q method with PI and fuzzy controllers," Eng. Technol. Appl. Sci. Res., 1(4), pp. 98-104, (2011). [Google Scholar]
- I. Irianto, S. Suhariningsih, and V. R. Dewanti, "Design of a banana leaf drying device (using the controller Chien Regulator I and Chien Servo I methods as PI control tuning)," JEEE-U (J. Electr. Electron. Eng. UMSIDA), 2(1), pp. 1-7, (2018). [Google Scholar]
- M. Moseva, S. Simonov, and M. Gorodnichev, "Development of a climate equipment parameter acquisition system using PID and fuzzy logic controllers to improve energy efficiency," Eng. Technol. Appl. Sci. Res., 14(5), pp. 16840-16846, (2024). [Google Scholar]
- A. N. Ramadhan, N. A. Windarko, and I. Irianto, "PI fuzzy controller of synchronous boost converter for drug storage thermoelectric cooler," JAREE (J. Adv. Res. Electr. Eng.), 5(1), (2021). [Google Scholar]
- A. A. Nurlaily, I. Irianto, and E. Sunarno, "Design and construction of a water hyacinth drying device for handicraft materials (using the Chien Regulator I and Chien Servo I tuning controller methods)," J. Teknol. Manaj. Inform., 3(2), (2017). [Google Scholar]
- P. T. Giang, V. T. Ha, and V. H. Phuong, "Drive control of a permanent magnet synchronous motor fed by a multi-level inverter for electric vehicle application," Eng. Technol. Appl. Sci. Res., 12(3), pp. 8658-8666, (2022). [Google Scholar]
- S. D. Nugraha, O. A. Qudsi, and D. S. Yanaratri, "Implementation of current fed push pull converter using PI control in independent home applications," J. Inovtek Polbeng, 8(1), pp. 67-73, (2018). [Google Scholar]
- T. M. Chikouche, A. Mezouar, T. Terras, and S. Hadjeri, "Variable gain PI controller design for speed control of a doubly fed induction motor using state-space nonlinear approach," Eng. Technol. Appl. Sci. Res., 3(3), pp. 433-439, (2013). [Google Scholar]
- D. Dane, S. Sutedjo, and O. A. Qudsi, "Buck converter design for DC motor speed control with PI control," PoliGrid, 2(2), pp. 52-55, (2021). [Google Scholar]
- A. F. Adila, et al., "A hardware implementation of SEPIC converter using ANFIS for water flow control," ROTASI, 26(2), pp. 45-52, (2024). [Google Scholar]
- M. Massarang, et al., "Comparison of load resistor and battery on controlling buck boost converter using fuzzy-PI method," MATEC Web Conf., 331, (2020), EDP Sciences. [Google Scholar]
- M. Ndje, J. M. Nyobe Yome, A. T. Boum, L. Bitjoka, and J. C. Kamgang, "Dynamic matrix control and tuning parameters analysis for a DC motor system control," Eng. Technol. Appl. Sci. Res., 8(5), pp. 3416-3420, (2018). [Google Scholar]
- E. Sulistyono, et al., "Design and implementation of a tapped inductor buck converter with PI control method in an independent house," in Proc. Seminar Nasional Teknologi Elektro Terapan, 1(1), (2017). [Google Scholar]
- F. Suryatini and A. Firasanti, "Analog P, PI, and PID control in DC motor speed control with Ziegler-Nichols tuning," JREC (J. Electr. Electron.), 6(1), pp. 65-80, (2018). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.