Open Access
Issue
E3S Web Conf.
Volume 677, 2025
The 3rd International Conference on Disaster Mitigation and Management (3rd ICDMM 2025)
Article Number 01004
Number of page(s) 6
Section Risk-Based Disaster Analysis for Regional Development and Spatial Planning
DOI https://doi.org/10.1051/e3sconf/202567701004
Published online 12 December 2025
  1. S. Fidan and T. Gorum, Distribution Characteristics of Fatal Landslides in Turkey and Determination of Priority Areas at National Scale. Türk Coğrafya Derg. 74(74), 123–134, (2020). https://doi.org/10.17211/tcd.731596 [Google Scholar]
  2. R. Hore(PhD), Stability Analysis of Rainfall-Induced Landslides: A Case Study of a Hilly Area in Bangladesh. Earthquake. 1(1), 1–13, (2023). https://doi.org/10.59429/ear.v1i1.95 [Google Scholar]
  3. M. Misriani, J. Joleha, E. Elianora, M. Shalahuddin, and A. Novan, Quantitative Landslide Risk Assessment for Residential Slopes in Indrapuri , Pekanbaru , Indonesia : A Blueprint Sustainable Housing. E3S Web of Conferences, 14001, (2024). https://doi.org/10.1051/e3sconf/202459314001 [Google Scholar]
  4. Y. Wang, Y. Li, and J. Chen, Comprehensive Analysis Method of Slope Stability Based on the Limit Equilibrium and Finite Element Methods and Its Application. Open J. Civ. Eng. 13(04), 555–571, (2023). https://doi.org/10.4236/ojce.2023.134040. [Google Scholar]
  5. Koffi J. Agbelele, Ernesto C. Houehanou, Marx Ferdinand Ahlinhan, Abdoul W. Ali, and Houngan Comlan Aristide, Assessment of Slope Stability by the Fellenius Slice Method: Analytical and numerical approach. World J. Adv. Res. Rev. 18(2), 1205–1214, (2023). https://doi.org/10.30574/wjarr.2023.18.2.0874. [Google Scholar]
  6. J. W. Shin, Y. Baek, and J. H. Song, Analysis of the Failure Area of the Slope Using the Slip Line Method. Appl. Sci. 13(6), (2023). https://doi.org/10.3390/app13063863. [Google Scholar]
  7. A. K. M. Zein and W. A. Karim, Stability of Slopes on Clays of Variable Strength by Limit Equilibrium and Finite Element Analysis Methods. Int. J. Geomate. 13(38), 157–164, (2017). https://doi.org/10.21660/2017.38.62697. [Google Scholar]
  8. H. B. K. Nguyen, M. M. Rahman, and M. R. Karim, Effect of soil anisotropy and variability on the stability of undrained soil slope. Front. Built Environ. 9(February), 1–11, (2023). https://doi.org/10.3389/fbuil.2023.1117858. [Google Scholar]
  9. N. S. Doan, Reliability Analysis and Uncertainty Quantification of Clay and Sand Slopes Stability Evaluated by Fellenius and Bishop’s Simplified Methods. Int. J. Geo-Engineering. 14(1), 1–15, (2023). https://doi.org/10.1186/s40703-023-00200-2. [Google Scholar]
  10. S. Hemeda, Geotechnical modelling and subsurface analysis of complex underground structures using PLAXIS 3D. Int. J. Geo-Engineering, 13(1), (2022). https://doi.org/10.1186/s40703-022-00174-7. [Google Scholar]
  11. V. Giannella, G. Baglivo, R. Giordano, R. Sepe, and R. Citarella, Structural FEM Analyses of a Landing Gear Testing Machine. Metals (Basel). 12(6), (2022). https://doi.org/10.3390/met12060937. [Google Scholar]
  12. W. N. Noël et al., Earthquake Effects on Slope Stability by Using Finite Element Method. Case Study: Brazzaville City, Republic of Congo. Int. J. Environ. Clim. Chang. 12(12), 798–804, (2022). https://doi.org/10.9734/ijecc/2022/v12i121516. [Google Scholar]
  13. M. Misriani, M.S.G.P. Putra, Yelvi, I. Birawaputra, and C.F.K. Sari, Landslide Hazard Investigation and Slope Stability Assessment of Indrapuri Housing Pekanbaru, Indonesia. Int. J. Geomate, 29(136), (2025). [Google Scholar]
  14. S. Kumar, S. S. Choudhary, and A. Burman, The effect of slope height and angle on the safety factor and modes of failure of 3D slopes analysis using limit equilibrium method. Beni-Suef Univ. J. Basic Appl. Sci, 12(84), (2023). https://doi.org/10.1186/s43088-023-00423-3. [Google Scholar]
  15. M. Misriani, A. Hakam, E. P. Putri, and D. K. Hasian, Developing a Small-Scale Experimental Method for Evaluating the Effectiveness of Soil Improvement Using Prefabricated Vertical Drains. J. Civ. Eng. Forum, 11(May), 155–166, (2025). https://doi.org/10.22146/jcef.13547. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.