Quick understanding of clay-sand stabilization in strength performance assessment on CBR and UCT tests

Open Access

Issue		E3S Web Conf. Volume 677, 2025 The 3^rd International Conference on Disaster Mitigation and Management (3^rd ICDMM 2025)


Article Number		06012
Number of page(s)		6
Section		Physical Infrastructure Management and Recovery
DOI		https://doi.org/10.1051/e3sconf/202567706012
Published online		12 December 2025

A. Alnmr and R. Ray, Investigating the impact of varying sand content on the physical characteristics of expansive clay soils from Syria. Geot. and Geol. Eng. 42(4), 2675–2691 (2024). https://doi.org/10.1007/s10706-023-02698-w [Google Scholar]
L. I. Dvorkin, Method of calculating the optimal sand content in normal-weight concrete. Mag. of Civ. Eng. 83(7) 186–197 (2018). https://doi.org/10.18720/MCE.83.17 [Google Scholar]
S. Liu, J. Zhan, and X. Wang, Influence of composition of curing agent and sand ratio of engineering excavated soil on mechanical properties of fluidized solidified soil. Mat. Sci. Pol. 41(1), 57–67 (2023). https://doi.org/10.2478/msp-2023-0007 [Google Scholar]
S. Wang, K. Shi, Y. Chen, J. Zahng, and C. Li, Analysis of strength characteristics and energy dissipation of improved-subgrade soil of high-speed railway above mined-out areas. Tehnicki Vjesnik, 30(1), 256–264 (2023). https://doi.org/10.17559/TV-20220502051049 [Google Scholar]
X. Zhuang, B. Yang, and H. Jin, Experimental study of influence of freeze–thaw cycles on the dynamic properties of weathered sand-amended expansive soils. App. Sci. 13(15) (2023). https://doi.org/10.3390/app13159008 [Google Scholar]
P. Lindh and P. Lemenkova, Shear bond and compressive strength of clay stabilised with lime/cement jet grouting and deep mixing: A case of Norvik, Nynäshamn. Nonli. Eng. 11(1), 693–710 (2022). https://doi.org/10.1515/nleng-2022-0269 [Google Scholar]
M. Vukićević, M. Marjanović, V. Pujević, and S. Jocković, The alternatives to traditional materials for subsoil stabilization and embankments. Materials 12(18) (2019). https://doi.org/10.3390/ma12183018 [Google Scholar]
M. Toyeb, A. Hakam, Fauzan, and Andriani, Study experimental on strength characteristics of alkali-activated pofa to soil stabilization as subgrade. Civ. and Envi. Eng. 20(2), 730–741 (2024). https://doi.org/10.2478/cee-2024-0055 [Google Scholar]
A. Alnmr, H. H. Hosamo, C. Lyu, R. P. Ray, and M. O. Alzawi, Novel insights in soil mechanics: integrating experimental investigation with machine learning for unconfined compression parameter prediction of expansive soil. App. Sci. 14(11) (2024). https://doi.org/10.3390/app14114819 [Google Scholar]
A. H. Vakili, M. Salimi, İ. Keskin, and M. Jamalimoghadam, A systematic review of strategies for identifying and stabilizing dispersive clay soils for sustainable infrastructure. Soil Tillage Res. 239, 106036 (2024). https://doi.org/10.1016/j.still.2024.106036 [Google Scholar]
D. Zhao, J. Yang, Z. Liu, C. Fang, and R. Gao, Microcementation mechanism of sandy loess reinforced with a cellulose curing agent. J. of Eng. Sci. and Tech. Rev. 17(2), 119–127 (2024). https://doi.org/10.25103/jestr.172.13 [Google Scholar]
A. Alnmr, R. Ray, and M. O. Alzawi, A novel approach to swell mitigation: Machine-learning-powered optimal unit weight and stress prediction in expansive soils. App. Sci. 14(4) (2024). https://doi.org/10.3390/app14041411 [Google Scholar]
J. Dong, Y. C. Wang, Z. H. Wu, and F. W. Gong, Anchor shear strength damage under varying sand content, freeze-thaw cycles, and axial pressure conditions. Buildings 14(6) (2024). https://doi.org/10.3390/buildings14061772 [Google Scholar]
Y. Fardyansah and N. Gofar, Pengaruh penambahan pasir terhadap daya dukung subgrade jalan. Cantilever: J. Pene. dan Ka. Bid. Tek. Sip. 9(2), 63–68 (2020). https://doi.org/10.35139/cantilever.v9i2.42 [Google Scholar]
A. Reno, F. Sarie, and S. Gandi, Pengaruh penambahan pasir pada tanah lempung terhadap nilai daya dukung dan kuat tekan bebas. J. Tek.: J. Teo. dan Ter. Bid. Ketek. 4(1), 63–72 (2020). https://doi.org/10.52868/jt.v4i1.2649 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.