Open Access
| Issue |
E3S Web Conf.
Volume 688, 2026
The 2nd International Conference on Sustainable Environment, Development, and Energy (CONSER 2025)
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 8 | |
| Section | Design, Manufacturing, and Maintenance Technology for Sustainable Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202668803004 | |
| Published online | 20 January 2026 | |
- A. Ambroziak and M. T. Solarczyk, Application and mechanical properties of aluminium alloys, in Shell Structures: Theory and Applications Vol. 4, (CRC Press, 2017). https://doi.org/10.1201/9781315166605-121 [Google Scholar]
- C. A. Buchanan, M. Charara, J. L. Sullivan, G. M. Lewis, and G. A. Keoleian, Lightweighting shipping containers: Life cycle impacts on multimodal freight transportation. Transp Res D Transp Environ. 62, 418–432 (2018). https://doi.org/10.1016/j.trd.2018.03.011 [Google Scholar]
- K. Okamoto, A. Sato, S. H. Park, and S. Hirano, Microstructure and mechanical properties of FSWed aluminum extrusion with bobbin tools. Materials Science Forum. 706-709, 990–995 (2012). https://doi.org/10.4028/www.scientific.net/MSF.706-709.990 [Google Scholar]
- S. Yan, H. Chen, C. Ma, Y. Nie, X. Wang, and Q. H. Qin, Local corrosion behaviour of hybrid laser-MIG welded Al-Zn-Mg alloy joints. Mater Des. 88, 1353–1365 (2015). https://doi.org/10.1016/j.matdes.2015.08.140 [Google Scholar]
- B. Han et al., Nano-indentation investigation on the local softening of equiaxed zone in 2060-T8/2099-T83 aluminum-lithium alloys T-joints welded by double-sided laser beam welding. J Alloys Compd. 756, 145–162 (2018). https://doi.org/10.1016/i.iallcom.2018.05.014 [Google Scholar]
- L. Wang, T. Chen, and S. Wang, Microstructural characteristics and mechanical properties of carbon nanotube reinforced AlSi10Mg composites fabricated by selective laser melting. Optik (Stuttg). 143, 173–179 (2017). https://doi.org/10.1016/i.iileo.2017.06.086 [Google Scholar]
- Y. Huang, D. Zhao, H. Chen, L. Yang, and S. Chen, Porosity detection in pulsed GTA welding of 5A06 Al alloy through spectral analysis. J Mater Process Technol. 259, 332–340 (2018). https://doi.org/10.1016/i.imatprotec.2018.05.006 [Google Scholar]
- H. Li, J. Zou, J. Yao, and H. Peng, The effect of TIG welding techniques on microstructure, properties and porosity of the welded ioint of 2219 aluminum alloy. Journal of Alloys and Compounds. 727, 531–539 (2017). https://doi.Org/10.1016/i.iallcom.2017.08.157 [Google Scholar]
- K. D. Carlson, Z. Lin, and C. Beckermann, Modeling the Effect of Finite-Rate Hydrogen Diffusion on Porosity Formation in Aluminum Alloys. Metallurgical and Materials Transactions B. 38(4), 541–555, (2007). https://doi.org/10.1007/s11663-006-9013-2 [Google Scholar]
- P. Kah and J. Martikainen, Influence of shielding gases in the welding of metals. International Journal of Advanced Manufacturing Technology. 64(9-12), 1411–1421 (2013). https://doi.org/10.1007/s00170-012-4111-6 [Google Scholar]
- G. K. Padhy, C. S. Wu, and S. Gao, Friction stir based welding and processing technologies - processes, parameters, microstructures and applications : A review. J Mater Sci Technol. 34(1), 1–38 (2018). https://doi.org/10.1016/i.imst.2017.11.029 [Google Scholar]
- T. Nishihara and A. Ito, Measurement of die temperature during friction stir forming. 49, 22–26 (2005). https://doi.org/10.1007/bf03266471 [Google Scholar]
- R. S. Mishra and Z. Y. Ma, Friction stir welding and processing. 50(1-2), 1–78 (2005). https://doi.org/10.1016/i.mser.2005.07.001 [Google Scholar]
- F. F. Santini et al., Microstructure features and mechanical properties of double-sided friction stir welded Joints of AA2050-T84 thick plates. Materials Research. 23(6), (2020). https://doi.org/10.1590/1980-5373-MR-2020-0309 [Google Scholar]
- Y. E. Widyantono et al., Comparative analysis of bobbin tool and one-step double-acting tool in friction stir welding of aluminum AA1100. International Journal of Lightweight Materials and Manufacture. 8(5), 577–594 (2025). https://doi.org/10.1016/i.iilmm.2025.05.002 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.