Open Access
| Issue |
E3S Web Conf.
Volume 688, 2026
The 2nd International Conference on Sustainable Environment, Development, and Energy (CONSER 2025)
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 8 | |
| Section | Design, Manufacturing, and Maintenance Technology for Sustainable Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202668803005 | |
| Published online | 20 January 2026 | |
- S. Teslia and A. Stepanchuk, Microstructural evolution of Al-15Fe alloy produced by mechanical milling and centrifugal atomization. Intermetallics (Barking). 149 (2022). doi: 10.1016/j.intermet.2022.107671 [Google Scholar]
- Y. Du, Z. Gu, Y. Zhang, and R. Bai, Microstructural evolution and mechanical properties of Cr-Ni-Mo-V steel with banded structure during tempering. Journal of Alloys and Metallurgical Systems. 8 (2024). doi: 10.1016/j.jalmes.2024.100131 [Google Scholar]
- S.J. Huang, A. Muneeb, A. Abbas, and R. Sankar, The effect of Mg content and milling time on the solid solubility and microstructure of Ti-Mg alloys processed by mechanical milling. Journal of Materials Research and Technology. 11, 1424–1433 (2021). doi: 10.1016/j.jmrt.2021.01.097 [Google Scholar]
- S. Sutrisna, D.S. Pamuji, A.B. Prasetiyo, I.Z. Ababil, and I. Aziz, Effect of annealing on microstructure and hardness of FeNiCo alloys synthesized by mechanical alloying. Jurnal Rekayasa Mesin. 15(1), 433–442 (2024). doi: 10.21776/jrm.v15i1.1690 [Google Scholar]
- P.G. McCormick, Application of mechanical alloying to chemical refining (overview), (1995). doi: 10.2320/matertrans1989.36.161 [Google Scholar]
- M. Mhadhbi and W. Polkowski, Synthesis and characterization of mechanically alloyed nanostructured (Ti,Cr)C carbide for cutting tools application. crystals (Basel). 12(9), (2022). doi: 10.3390/cryst12091280 [Google Scholar]
- A. Rizzo, et al., The critical raw materials in cutting tools for machining applications: A review. Materials. 13(6), (2020). doi: 10.3390/ma13061377 [Google Scholar]
- R. Wang, Z. Liu, Z. Wang, K. Dong, and Z. Cui, Influence of second phase on the formation of mixed grain structures in 22Cr-13Ni-5Mn after deformation and solid solution. Mater Des. 258, (2025). doi: 10.1016/j.matdes.2025.114675 [Google Scholar]
- Z. Wang, J. Zhang, C. Zhang, F. Ye, B. Liu, and Y. Liang, Effect of initial grain size on microstructure, texture and magnetic properties of non-oriented electrical steel, Journal of Materials Research and Technology. 31, 1607–1615 (2024). doi: 10.1016/j.jmrt.2024.06.193 [Google Scholar]
- S. Jiang, J. Lv, Z. Shi, and J. Lin, A study of dynamic recovery and recrystallisation mechanisms in aluminium alloy AA7050 at different thermomechanical processing conditions. Materials Science and Engineering: A. 914, (2024). doi: 10.1016/j.msea.2024.147117 [Google Scholar]
- C. Wang, et al., Microstructures, thermal and mechanical properties of pure tungsten—a comparison between selective laser melting and hot rolling. Chinese Journal of Mechanical Engineering (English Edition). 35(1) (2022). doi: 10.1186/s10033-022-00712-5 [Google Scholar]
- J. Macchi, et al., Impact of carbon segregation on transition carbides and cementite precipitation during tempering of low carbon steels: experiments and modeling. Acta Mater. 272, (2024). doi: 10.1016/j.actamat.2024.119919 [Google Scholar]
- M. Masoumi, M.A. Mohtadi-Bonab, R.C.P. Loureiro, J.L. Cardoso, M. Béres, and H.F.G. de Abreu, Influence of spheroidized cementite on ferritic matrix boundary characteristics and mechanical behavior in commercial carbon steels. Materials Research. 27, (2024). doi: 10.1590/1980-5373-MR-2023-0497 [Google Scholar]
- Y. Zhang, et al., Effect of oxygen content on microstructure and tensile properties of a 22cr-5al ods steel. Materials. 14(9), 1–10 (2021). doi: 10.3390/ma14092241 [Google Scholar]
- Sutrisna, A.B. Prasetiyo, R. Kartikasari, and I. Aziz, Effect of milling time variation on TiTaVWCr HEA powder as nuclear material on microstructure and mechanical properties by a mechanical alloying method, in IOP Conference Series: Earth and Environmental Science, Institute of Physics, (2023). doi: 10.1088/1755-1315/1151/1/012052 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.