Open Access
| Issue |
E3S Web Conf.
Volume 693, 2026
International Process Metallurgy Conference (IPMC 2025)
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 5 | |
| Section | Physical Metallurgy and Corrosion | |
| DOI | https://doi.org/10.1051/e3sconf/202669304003 | |
| Published online | 09 February 2026 | |
- T.N. Wibowo, P.T. Iswanto, B.H. Priyambodo, N. Amin, Pengaruh Variasi Waktu Shot Peening terhadap Struktur Mikro dan Kekerasan Permukaan Pada Material Implan Aisi 304. ROTOR. 70–73, (2016) [Google Scholar]
- R. Rahajeng, Analisis Kekerasan Baja Tahan Karat Aisi 304 Ternitridasi Padat Sebagai Alternatif Material Sendi Tulang Panggul Tiruan. (2020) [Google Scholar]
- D. Pathote, D. Jaiswal, V. Singh, C.K. Behera, Optimization of electrochemical corrosion behavior of 316L stainless steel as an effective biomaterial for orthopedic applications. Materials today: proceedings, 57: p. 265–269, (2022) [Google Scholar]
- N.I.W. Lestari, Efek Variasi Energi Implantasi Ion Nitrogen Terhadap Karakteristik Stainless Steel Untuk Material Implan, Universitas Airlangga. 2017 [Google Scholar]
- S. Mohammadzehi, and H. Mirzadeh, Grain refinement of austenitic stainless steels by cross rolling and annealing treatment: A review. Journal of Ultrafine Grained and Nanostructured Materials. 57(2): p. 112–119. (2024) [Google Scholar]
- D.M. Xu, G.Q. Li, X.L. Wan, R.D.K. Misra, J.X. Yu, G. Xu, On the deformation mechanism of austenitic stainless steel at elevated temperatures: A critical analysis of fine-grained versus coarse-grained structure. Materials Science and Engineering: A. 773: p. 138722. (2020) [Google Scholar]
- A. Järvenpää, M. Jaskari, A. Kisko, P. Karjalaine, Processing and properties of reversion-treated austenitic stainless steels. Metals. 10(2): p. 281. (2020) [Google Scholar]
- M. Salehi, M. Yeganeh, R.B. Heidari, M. Eskadari, Comparison of the microstructure, corrosion resistance, and hardness of 321 and 310s austenitic stainless steels after thermo-mechanical processing. Materials Today Communications. 31: p. 103638. (2022) [Google Scholar]
- M. Park, K. Kim, J. Jang, H.C. Kim, H.S. Moon, J.B. Jeon, D. Gam, K.Y. Sohn, B.J. Kim, Influence of heat treatment on mechanical properties for cold worked 304 austenitic stainless steel. Korean Journal of Metals and Materials. 56(7): p. 490–498. (2018) [Google Scholar]
- S. Mironov, S. Zherebtsov, and S. Semiatin, The grain-refinement mechanism during heavy cold- rolling of commercial-purity titanium. Journal of Alloys and Compounds. 895: p. 162689. (2022) [Google Scholar]
- S. Kheiri, H. Mirzadeh, and M. Naghizadeh, Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing. Materials Science and Engineering: A. 759: p. 90–96. (2019) [Google Scholar]
- M.T. Kim, T.M. Park, K.H. Baik, W.S. Choi, J. Han, Effects of cold rolling reduction ratio on microstructures and tensile properties of intercritically annealed medium-Mn steels. Materials Science and Engineering: A. 752: p. 43–54. (2019) [Google Scholar]
- C. Wang, P. Zhu, Y.H. Lu, T. Shoji, Effect of heat treatment temperature on microstructure and tensile properties of austenitic stainless 316L using wire and arc additive manufacturing. Materials Science and Engineering: A. 832: p. 142446. (2022) [Google Scholar]
- Liang, X., et al., Coupled effect of temperature and impact loading on tensile strength of ultra-high performance fibre reinforced concrete. Composite Structures. 229: p. 111432. (2019) [Google Scholar]
- Long, S.-L., et al., Study on the formation of micro- voids during ductile fracture. Materials Research Express. 5(1): p. 016515. (2018) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.