Open Access
| Issue |
E3S Web Conf.
Volume 693, 2026
International Process Metallurgy Conference (IPMC 2025)
|
|
|---|---|---|
| Article Number | 04002 | |
| Number of page(s) | 5 | |
| Section | Physical Metallurgy and Corrosion | |
| DOI | https://doi.org/10.1051/e3sconf/202669304002 | |
| Published online | 09 February 2026 | |
- R. Sharma, E. Vijayalakshmi, R. Reddy, P. Tekade, S. Singh, and A.K. Singh, Failure investigation of cartridge case, Procedia Struct. Integr., vol. 14, pp. 738–745, (2019) doi: https://doi.org/10.1016/j.prostr.2019.05.092. [Google Scholar]
- Mutlu, A. Karakaş, H. Kuşdemir, U.K. Koltan, and T. Yalçinkaya, Flow forming and recrystallization behaviour of CuZn30 alloy, Mater. Res. Proc., vol. 28, pp. 1021–1028, (2023) doi: https://doi.org/10.21741/9781644902479-112. [Google Scholar]
- Y. Yu, W. Chen, L. Xie, and Y. Song, Effect of heat treatment on microstructure evolution, phase transformation and mechanical properties of dual phase Cu-Zn alloy, J. Alloys Compd., vol. 904, p. 163960, (2022). doi: https://doi.org/10.1016/j.jallcom.2022.163960. [Google Scholar]
- Gaurav P., Chakraborty, and S.B.P. Vejendla, Deformation and annealing of brass, Mater. Today Proc., vol. 64, pp. 1380–1383, (2022). doi: https://doi.org/10.1016/j.matpr.2022.04.502. [Google Scholar]
- Widyastuti, R. Rochiem, D.M. Fellicia, C.F.N. Adrinanda, and A.P. Wibowo, Mechanical Properties, Microstructural, and Deep Drawing Formability Analysis on the Annealed CuZn35 Brass Alloy for Cartridge Application, Key Eng. Mater., vol. 939, no. January, pp. 31–37, (2023). doi: https://doi.org/10.4028/p-21x8y5. [Google Scholar]
- J. Birch et al., A micromechanical study of heat treatment induced hardening in alpha-brass, vol. 278, no. August, (2024). doi: https://doi.org/10.1016/j.actamat.2024.120277. [Google Scholar]
- H. Wang, P. Zhang, C. Wang, Q. Zhu, and G. Chen, Investigation of the size effect on flow stress and deformation mechanism in Cu-Zn thin sheets, Mater. Sci. Eng. A, vol. 922 (2025). doi: https://doi.org/10.1016/j.msea.2024.147622. [Google Scholar]
- M. Polášek and D. Kezić, Comparison and Assessment of the Cuzn30 Brass Structure in the Production of the 9X19 Luger Cartridge Case, Univ. Rev., vol. 15, no. 1, pp. 39–44, (2021). [Google Scholar]
- I.E. Volokitina, Effect Of Preliminary Heat Treatment On Deformation Of Brass By The Method Of ECAP, vol. 63, pp. 163–167 (2021). doi: https://doi.org/10.1007/s11041-021-00664-y. [Google Scholar]
- T.V. Rajan, C.P. Sharma, and A. Sharma, Heat Treatment Principle Technique, Third. Delhi: PHI Learning Pvt. Ltd., 2023. [Google Scholar]
- I. Angela, I. Basori, and B.T. Sofyan, Effect of cold rolling and annealing temperature to the characteristics of α + β phases in Cu-29.5Zn-2.5Al alloy produced by gravity casting, J. Min. Metall. Sect. B Metall., vol. 56, no. 1, pp. 89–97, (2020). doi: https://doi.org/10.2298/JMMB180820037A. [Google Scholar]
- J. Luštinec, M. Roško, and V. Očenášek, Structural and Mechanical Properties of CuZn30 Cartridge Brass in Real Production Conditions, Manuf. Technol., vol. 23, no. 6, pp. 846–852, (2023) doi: https://doi.org/10.21062/MFT.2023.090. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.