Open Access
Issue
E3S Web Conf.
Volume 702, 2026
Second International Conference on Innovations in Sustainable and Digital Construction Practices (ISDCP 2026)
Article Number 01022
Number of page(s) 15
Section Construction Management & Materials
DOI https://doi.org/10.1051/e3sconf/202670201022
Published online 01 April 2026
  1. D.-Y. Yoo, N. Banthia, Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review. Cem. Concr. Compos. 73, 267–280 (2016). https://doi.Org/10.1016/j.cemconcomp.2016.08.001 [Google Scholar]
  2. K.L. Scrivener, V.M. John, E.M. Gartner, Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry. Cem. Concr. Res. 114, 2–26 (2018). https://doi.org/10.1016/j.cemconres.2018.03.015 [Google Scholar]
  3. R. Yu, P. Spiesz, H.J.H. Brouwers, Development of an eco-friendly ultra-high performance concrete (UHPC) with efficient cement and mineral admixtures uses. Cem. Concr. Compos. 55, 383–394 (2015). https://doi.org/10.1016/j.cemconcomp.2014.09.024 [Google Scholar]
  4. C. Shi, Z. Wu, J. Xiao, D. Wang, Z. Huang, Z. Fang, A review on ultra high performance concrete: Part I. Raw materials and mixture design. Constr. Build. Mater. 101, 741–751 (2015). https://doi.org/10.1016/j.conbuildmat.2015.10.088 [CrossRef] [Google Scholar]
  5. H.J. Yim, H. Lee, J.H. Kim, Evaluation of mortar setting time by using electrical resistivity measurements. Constr. Build. Mater. 146, 679–686 (2017). https://doi.org/10.1016/j.conbuildmat.2017.04.088 [Google Scholar]
  6. A. Mardani-Aghabaglou, O.C. Boyaci, H. Hosseinnezhad, B. Felekoglu, K. Ramyar, Effect of gypsum type on properties of cementitious materials containing high range water reducing admixture. Cem. Concr. Compos. 68, 15–26 (2016). https://doi.org/10.1016/j.cemconcomp.2016.02.007 [Google Scholar]
  7. J. Xue, B. Briseghella, F. Huang, C. Nuti, H. Tabatabai, B. Chen, Review of ultra-high performance concrete and its application in bridge engineering. Constr. Build. Mater. 260, 119844 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119844 [Google Scholar]
  8. J. Du et al., New development of ultra-high-performance concrete (UHPC). Compos. Part B Eng. 224, 109220 (2021). https://doi.org/10.1016/j.compositesb.2021.109220 [Google Scholar]
  9. M.I. Khan, Y.M. Abbas, G. Fares, Review of high and ultrahigh performance cementitious composites incorporating various combinations of fibers and ultrafines. J. King Saud Univ. Eng. Sci. 29, 339–347 (2017). https://doi.org/10.1016/j.jksues.2017.03.006 [Google Scholar]
  10. R. Yu, P. Spiesz, H.J.H. Brouwers, Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC). Cem. Concr. Res. 56, 29–39 (2014). https://doi.org/10.1016/j.cemconres.2013.11.002 [Google Scholar]
  11. D.-Y. Yoo, N. Banthia, Y.-S. Yoon, Recent development of innovative steel fibers for ultra-high-performance concrete (UHPC): A critical review. Cem. Concr. Compos. 145, 105359 (2024). https://doi.org/10.1016/j.cemconcomp.2023.105359 [Google Scholar]
  12. F. Song, Q. Li, S. Xu, A review of self-sensing ultra-high performance concrete: Towards next-generation smart structural materials. Cem. Concr. Compos. 145, 105350 (2024). https://doi.org/10.1016/j.cemconcomp.2023.105350 [Google Scholar]
  13. D.-Y. Yoo, W. Shin, B. Chun, Corrosion effect on tensile behavior of ultra-high- performance concrete reinforced with straight steel fibers. Cem. Concr. Compos. 109, 103566 (2020). https://doi.org/10.1016/j.cemconcomp.2020.103566 [Google Scholar]
  14. Y. Wang et al., Preparation of sustainable ultra-high performance concrete (UHPC) with ultra-fine glass powder as multi-dimensional substitute material. Constr. Build. Mater. 401, 132857 (2023). https://doi.org/10.1016/j.conbuildmat.2023.132857 [Google Scholar]
  15. M. Amran, S.-S. Huang, A.M. Onaizi, N. Makul, H.S. Abdelgader, T. Ozbakkaloglu, Recent trends in ultra-high performance concrete (UHPC): Current status, challenges, and future prospects. Constr. Build. Mater. 352, 129029 (2022). https://doi.org/10.1016/Lconbuildmat.2022.129029 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.