Open Access
Issue
E3S Web Conf.
Volume 702, 2026
Second International Conference on Innovations in Sustainable and Digital Construction Practices (ISDCP 2026)
Article Number 01023
Number of page(s) 14
Section Construction Management & Materials
DOI https://doi.org/10.1051/e3sconf/202670201023
Published online 01 April 2026
  1. V. Nguyen-Van, C.C. Jie, J. Lao, Z. Huanyu, S. Qian, Performance of lightweight, reinforced, and assemblable 3D-printed concrete columns with low-carbon engineered cementitious composites. Eng. Struct. 352, 122133 (2026). https://doi.Org/10.1016/j.engstruct.2026.122133 [Google Scholar]
  2. S.H. Bong, Y. Zhao, Y. Gao, H. Du, High-volume glass powder cementitious material for low-carbon concrete additive manufacturing. Constr. Build. Mater. 513, 145431 (2026). https://doi.org/10.1016/j.conbuildmat.2026.145431 [Google Scholar]
  3. S. Khan, S. Al-Deen, C.K. Lee, Fresh state, short and long-term mechanical properties of ternary supplementary cementitious material-based low-carbon concretes. Constr. Build. Mater. 506, 144819 (2026). https://doi.Org/10.1016/j.conbuildmat.2025.144819 [Google Scholar]
  4. D.O.F. Silva, V.M. Pereira, A.C.V. Coelho, S.C. Angulo, High recovery of anhydrous cement in dried concrete slurry waste for use as supplementary cementitious material in low- CO2 concretes. Clean. Eng. Technol. 29, 101076 (2025). https://doi.Org/10.1016/j.clet.2025.101076 [Google Scholar]
  5. M.A. Mahi, R. Zentar, F. Becquart, A. Sadok, T. Gaudron, Mechanical, microstructural and environmental performance of 100% recycled-aggregate concrete with low-carbon binders. Results Eng. 29, 109223 (2026). https://doi.org/10.1016/j.rineng.2026.109223 [Google Scholar]
  6. H. Venu, G. Murali, V.R. Ramkumar, T. Sieh Kiong, N. Mazlini Razali, Assessment of fracture toughness in fibrous concrete via Brazilian test: Experimental study with low-clinker cementitious binder. Theor. Appl. Fract. Mech. 133, 104641 (2024). https://doi.org/10.1016/j.tafmec.2024.104641 [Google Scholar]
  7. J. Liu, P. Rauwoens, O. Cizer, Transforming construction waste into low-carbon cementitious materials through co-calcination of recycled concrete fines and kaolinite. Environ. Res. 291, 123530 (2026). https://doi.org/10.1016/j.envres.2025.123530 [Google Scholar]
  8. C.B. Cheah, J.J. Liew, K.L.P. Khaw, H. Bin Md Akil, U.J. Alengaram, Calcined clay as a low-carbon cementitious material: Comprehensive review of treatment method, properties, and performance in concrete. Clean. Waste Syst. 11, 100323 (2025). https://doi.org/10.1016/j.clwas.2025.100323 [Google Scholar]
  9. G. Murali, L.S. Wong, V.R. Ramkumar, S.R. Abid, S. Karthik, From waste to resource recycled lime sludge: Sustainable low clinker cementitious binder, a comprehensive study on hydration and strength of concrete. J. Build. Eng. 86, 108935 (2024). https://doi.org/10.1016/Ljobe.2024.108935 [Google Scholar]
  10. J. Li, J. Xia, L. Di Sarno, G. Gong, Towards a better binder for pervious concrete: A case study on the flexural strength of fibre-reinforced high-strength cementitious paste (F-HSCP) under different curing conditions. Case Stud. Constr. Mater. 23, e05059 (2025). https://doi.Org/10.1016/j.cscm.2025.e05059 [Google Scholar]
  11. J. Bawab, H. El-Hassan, A. El-Dieb, J. Khatib, Utilization of cement-pozzolana-carbide slag binder and carbonation curing in concrete: A step towards carbon-neutrality. Green Technol. Sustain. 4, 100344 (2026). https://doi.org/10.1016/j.grets.2026.100344 [Google Scholar]
  12. S. Shirzad, E. Mahyari, J. Culpepper, C. Burns, Synergistic biochar-fly ash blended cementitious systems: Experimental, microstructural, and predictive insights into strength development of sustainable mortar and concrete. Constr. Build. Mater. 509, 145216 (2026). https://doi.org/10.1016/j.conbuildmat.2026.145216 [Google Scholar]
  13. C. Johansson, J. Rootzen, S. Escudero Carmona, Concrete change: Exploring future scenarios for the supply of supplementary cementitious materials in the EU. Dev. Built Environ. 25, 100831 (2026). https://doi.org/10.1016/j.dibe.2025.100831 [Google Scholar]
  14. Bardouh, E. Toussaint, S. Amziane, S. Marceau, Evaluating the flexural performance of bio-based concrete with different types of bio-aggregate and binder. Constr. Build. Mater. 509, 145176 (2026). https://doi.org/10.1016/j.conbuildmat.2026.145176 [Google Scholar]
  15. Jin, Y. Ji, Effect and mechanism of composite cementitious system concrete modification by temperature rising inhibitor: Hydration heat control, mechanical properties, and sustainability. Process Saf. Environ. Prot. 207, 108424 (2026). https://doi.org/10.1016/j.psep.2026.108424 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.