Open Access
| Issue |
E3S Web Conf.
Volume 704, 2026
2nd International Conference on Sciences and Techniques for Renewable Energy and the Environment (STR2E 2026)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/202670401007 | |
| Published online | 10 April 2026 | |
- J. Choucri, F. Talhaoui, K. El Ganaoui, et al., Corrosion behavior and susceptibility to stress corrosion cracking of leaded brass alloys in simulated drinking water, Materials 15, 144 (2021). https://doi.org/10.3390/ma15010144 [Google Scholar]
- P. Jarvis, J. Fawell, Lead in drinking water – An ongoing public health concern?, Curr. Opin. Environ. Sci. Health 20, 100239 (2021). https://doi.org/10.1016/j.coesh.2021.100239 [Google Scholar]
- J. Johansson, P. Alm, R. M’Saoubi, P. Malmberg, J.-E. Ståhl, V. Bushlya, On the function of lead (Pb) in machining brass alloys, Int. J. Adv. Manuf. Technol. 120, 7263–7275 (2022). https://doi.org/10.1007/s00170-022-09205-0 [Google Scholar]
- S. Jasper, R. Subash, K. Muthuneelakandan, D. Vijayakumar, S. Jhansi Ida, The Mechanical Properties of Brass Alloys: A Review, Eng. Proc. 93, 11 (2025). https://doi.org/10.3390/engproc2025093011 [Google Scholar]
- H. Lee, I. Lee, X. Xu, T. Omori, R. Kainuma, Revisiting the phase equilibria in the Cu–Zn binary system, J. Phase Equilibria Diffus. 45, 304–317 (2024). https://doi.org/10.1007/s11669-023-01061-z [Google Scholar]
- E. Mohsine, I. Touaiher, H. Oudghiri Hassani, S. Taibi, K. Azzaoui, Microstructural integrity of recycled CuZn40Pb2 brass in defect-free sanitary fittings: A process optimization approach, Moroccan J. Chem. 13, 1808–1824 (2025). https://doi.org/10.48317/IMIST.PRSM/morjchem-v13i4-59972 [Google Scholar]
- P. Stavroulakis, A. I. Toulfatzis, G. A. Pantazopoulos, A. S. Paipetis, Machinable leaded and eco-friendly brass alloys for high-performance manufacturing processes: A critical review, Metals 12, 246 (2022). https://doi.org/10.3390/met12020246 [Google Scholar]
- K. J. Al-Fadhalah, M. A. Rafeeq, N. Thomas, Microstructure and texture development in thermomechanically processed leaded brass, Metals 11, 998 (2021). https://doi.org/10.3390/met11070998 [Google Scholar]
- J. Krawczyk, The role of lead in the machinability of copper alloys, Adv. Mater. Sci. 25, 1–12 (2025). https://doi.org/10.2478/adms-2025-0015 [Google Scholar]
- H. Y. Atay, G. Uslu, Y. Kahramaz, Ö. Atay, Investigations of microstructure and mechanical properties of brass alloys produced by sand casting at different casting temperatures, IOP Conf. Ser.: Mater. Sci. Eng. 726, 012018 (2020). https://doi.org/10.1088/1757-899X/726/1/012018 [Google Scholar]
- J. Y. Kim, J. E. Lee, M. S. Kim, Enhancing machinability in free-cutting duplex brass alloys: Isotropic blocky α phase formation via optimized hot extrusion processing, J. Alloys Compd. 1010, 177062 (2024). https://doi.org/10.1016/j.jallcom.2024.177062 [Google Scholar]
- L. Bertoletti, M. Gelfi, L. Girelli, A. Pola, Failure analysis of a hot stamped CuZn40Pb2 brass hydraulic component, Eng. Fail. Anal. 187, 110617 (2026). https://doi.org/10.1016/j.engfailanal.2026.110617 [Google Scholar]
- L. Huang, B. Peng, Q. Yue, G. Huang, C. Wang, R. Wang, N. Tian, First-principles study on the electrical and thermal conductivities of Cu–Zn binary alloys, Materials 18, 2310 (2025). https://doi.org/10.3390/ma18102310 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.