Open Access
| Issue |
E3S Web Conf.
Volume 706, 2026
3rd International Conference on Environment, Green Technology, and Digital Society (INTERCONNECTS 2025)
|
|
|---|---|---|
| Article Number | 02012 | |
| Number of page(s) | 9 | |
| Section | Engineering and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202670602012 | |
| Published online | 21 April 2026 | |
- Wang, X.; Ren, A.; Lin, J.; Liu, Y.; Wang, P.; Tao, H. The Influence of Post-Weld Heat Treatment on the Performance of 2024 Aluminum Alloy Laser Autogenous Welded Joints. J. Mater. Eng. Perform. 2025, doi:10.1007/s11665-025-12022-7. [Google Scholar]
- Atmoko, N.T.; Priyambodo, B.H.; Margono; Suryono, E. The Heat Treatment Effect of Cast Iron on Mechanical Properties and Microstructure. AIP Conf. Proc. 2023, 2689, 70019, doi:10.1063/5.0116343. [Google Scholar]
- Priyambodo, B.H.; Margono; Yaqin, R.I. Improve Hardness and Microstructure on S45C by Annealing and Shot Peening Processes. AIP Conf. Proc. 2023, 2706, 20044, doi:10.1063/5.0120783. [Google Scholar]
- Qin, D.; Fu, T.; Fu, L.; Ye, C.; Ma, S.; Shan, A. Enhancement of Strength–Ductility in a Martensitic Stainless Steel via Heavy Warm–Rolling and Tempering– Partitioning Treatment. J. Mater. Sci. 2025, 60, 14102–14123, doi:10.1007/s10853-025-11009-y. [Google Scholar]
- Babasafari, Z.; Pan, A. V; Pahlevani, F.; Hossain, R.; Sahajwalla, V. Effects of Austenizing Temperature , Cooling Rate and Isothermal Temperature on Overall Phase Transformation Characteristics in High Carbon Steel. J. Mater. Res. Technol. 2020, 9, 15286–15297. [Google Scholar]
- Javaheri, V.; Haiko, O.; Sadeghpour, S.; Valtonen, K.; Komia, J.; Porter, D. On the Role of Grain Size on Slurry Erosion Behavior of a Novel Medium-Carbon , Low-Alloy Pipeline Steel after Induction Hardening. Wear 2021, xxx, xxx. [Google Scholar]
- Scheuer, C.J.; Cardoso, R.P.; Brunatto, S.F. History, Evolution, and Current State of Carburizing Treatment on Martensitic Stainless Steels. Int. J. Adv. Manuf. Technol. 2025, 141, 141–170, doi:10.1007/s00170-025-16701-6. [Google Scholar]
- Nguyen, V.; Son, P.; Id, M.; Dang, H.; Id, N.H. Optimization of Arc Quenching Parameters for Enhancing Surface Hardness and Line Width in S45C Steel Using Taguchi Method. PLoS One 2024, 12, 1–17, doi:10.1371/journal.pone.0314648. [Google Scholar]
- Zhou, N.; Liu, G.; Liu, K.; Wang, X. The Influence of Scrap Steel Types in Ladle on Heat Transfer Characteristics During Preheating Process. J. Sustain. Metall. 2026, doi:10.1007/s40831-026-01418-x. [Google Scholar]
- Pashangeh, S.; Ghasemi Banadkouki, S.S.; Moradi Ardekani, M.H. Phase Transformation Kinetics of Austenite in DIN 1.5025 Steel under Controlled Slow Cooling Conditions. J. Mater. Eng. Perform. 2025, 34, 29539–29551, doi:10.1007/s11665-025-11410-3. [Google Scholar]
- Bhadauria, A.; Reddy, K.V.; Khatirkar, R.K.; Id, D.B. Investigating the Structural Properties and Wear Resistance of Martensitic Stainless Steels. PLoS One 2024, 11, 1–17, doi:10.1371/journal.pone.0312242. [Google Scholar]
- Liu, T.; Zhang, X.; Cui, X.; Chen, S.; Sun, X.; Long, J.; Zheng, Z. Effects of C Content and Tempering Temperature on Impact-Abrasive Wear Resistance of High-C Martensitic Steel. J. Iron Steel Res. Int. 2025, 32, 1741–1752, doi:10.1007/s42243-024-01288-1. [Google Scholar]
- Han, X.; Zhang, Z.; Barber, G.C.; Thrush, S.J.; Li, X. Wear Resistance of Medium Carbon Steel with Different Microstructures. Materials (Basel). 2021, 14, 1–13, doi:doi.org/10.3390/ma14082015. [Google Scholar]
- Wu, B.; Hu, F.; Wang, Z.; Yang, S.; Zhong, R.; Shang, C.; Yang, Z.; Zhang, C. Unraveling the Effects of Austenitizing Temperature and Austenite Grain Size on the Crystallographic Characteristics and Mechanical Properties of Martensitic Transformation Products in a Low-Alloy Steel. Acta Metall. Sin. (English Lett. 2023, 36, 694–704, doi:10.1007/s40195-022-01501-8. [Google Scholar]
- Rajakrishnan, N.; Sadeghifar, M.; Bhattacharjee, P.; Champliaud, H. Kinetics of Austenite Formation in a Medium-Carbon , Low-Alloy Steel with an Initial Martensite Microstructure : Influence of Prior Austenite Grain Size. J. Manuf. Mater. Process. 2025, 9, 1–17. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.