EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 730 (2026) E3S Web Conf., 730 (2026) 03013 References
Open Access
Issue
E3S Web Conf.
Volume 730, 2026
International Conference on Advances and Innovations in Soft Soil Engineering (Soft Soils 2026)
Article Number 03013
Number of page(s) 6
Section Constitutive, Numerical, and Machine Learning Models
DOI https://doi.org/10.1051/e3sconf/202673003013
Published online 03 August 2026
  1. M. Kitazume, M. Terashi, The deep mixing method, Vol. 21 (CRC Press, London, 2013). [Google Scholar]
  2. M. Bouassida, A. Porbaha, Ultimate bearing capacity of soft clays reinforced by a group of columns— application to a deep mixing technique, Soils Found. 44, 91–101 (2004). https://doi.org/10.3208/sandf.44.3_91 [Google Scholar]
  3. M. Kitazume, K. Maruyama, Internal stability of group column type deep mixing improved ground under embankment loading, Soils Found. 47, 437–455 (2007). https://doi.org/10.3208/sandf.47.437 [Google Scholar]
  4. Z. F. Hu, Z. Q. Yue, J. Zhou, L. G. Tham, Design and construction of a deep excavation in soft soils adjacent to the Shanghai Metro tunnels, Can. Geotech. J. 40, 933–948 (2003). https://doi.org/10.1139/t03-041 [Google Scholar]
  5. F. H. Lee, Y. Lee, S. H. Chew, K. Y. Yong, Strength and modulus of marine clay-cement mixes, J. Geotech. Geoenviron. Eng. 131, 178–186 (2005). https://doi.org/10.1061/(ASCE)1090-0241(2005)131:2(178) [Google Scholar]
  6. M. E. C. Bruce, R. R. Berg, J. G. Collin, G. M. Filz, M. Terashi, D. S. Yang, Deep Mixing for Embankment and Foundation Support, FHWA-HRT-13-046 (2013). [Google Scholar]
  7. S. Larsson, M. Dahlström, B. Nilsson, Uniformity of lime-cement columns for deep mixing: a field study, Ground Improv. 9, 1–15 (2005). https://doi.org/10.1680/grim.9.1.1.58541 [Google Scholar]
  8. M. Kitazume, Recent Development and Future Perspectives of Quality Control and Assurance for the Deep Mixing Method, Appl. Sci. 11, 9155 (2021). https://doi.org/10.3390/app11199155 [Google Scholar]
  9. D. Sulsky, Z. Chen, H. L. Schreyer, A particle method for history-dependent materials, Comput. Methods Appl. Mech. Eng. 118, 179–196 (1994). https://doi.org/10.1016/0045-7825(94)90112-0 [Google Scholar]
  10. S. G. Bardenhagen, E. M. Kober, The generalized interpolation material point method, Comput. Model. Eng. Sci. 5, 477–496 (2004). https://doi.org/10.3970/cmes.2004.005.477 [Google Scholar]
  11. A. Casagrande, S. D. Wilson, Effect of rate of loading on the strength of clays and shales at constant water content, Geotechnique 2, 251–263 (1951). https://doi.org/10.1680/geot.1951.2.3.251 [Google Scholar]
  12. J. Graham, J. H. A. Crooks, A. L. Bell, Time effects on the stress-strain behaviour of natural soft clays, Geotechnique 33, 327–340 (1983). https://doi.org/10.1680/geot.1983.33.3.327 [Google Scholar]
  13. Y. Hu, M. F. Randolph, A practical numerical approach for large deformation problems in soil, Int. J. Numer. Anal. Methods Geomech. 22, 327–350 (1998). https://doi.org/10.1002/(SICI)1096-9853(199805)22:5<327::AID-NAG920>3.0.CO;2-X [Google Scholar]
  14. Q.-A. Tran, W. Sołowski, Generalized Interpolation Material Point Method modelling of large deformation problems including strain-rate effects–Application to penetration and progressive failure problems, Comput. Geotech. 106, 249–265 (2019). https://doi.org/10.1016/j.compgeo.2018.10.020 [Google Scholar]
  15. D. Mohapatra, S. Mohammadi Hasanbarough, M. Saresma, J. Virtasalo, W. T. Sołowski, Numerical simulation of in-situ free fall cone penetrometer tests using the material point method, in UK Association for Computational Mechanics, Durham University, pp. 157–160 (2024). https://doi.org/10.62512/conf.ukacm2024.101 [Google Scholar]
  16. I. Einav, M. F. Randolph, Combining upper bound and strain path methods for evaluating penetration resistance, Int. J. Numer. Methods Eng. 63, 1991–2016 (2005). https://doi.org/10.1002/nme.1350 [Google Scholar]
  17. N. Boukpeti, D. J. White, M. F. Randolph, H. E. Low, Strength of fine-grained soils at the solid–fluid transition, Geotechnique 62, 213–226 (2012). https://doi.org/10.1680/geot.9.P.069 [Google Scholar]
  18. G. Biscontin, J. M. Pestana, Influence of peripheral velocity on vane shear strength of an artificial clay, Geotech. Test. J. 24, 423–429 (2001). https://doi.org/10.1520/GTJ11140J [Google Scholar]
  19. S. W. Jeong, S. Leroueil, J. Locat, Applicability of power law for describing the rheology of soils of different origins and characteristics, Can. Geotech. J. 46, 1011–1023 (2009). https://doi.org/10.1139/T09-031 [Google Scholar]
  20. K. K. Sorensen, B. A. Baudet, B. Simpson, Influence of strain rate and acceleration on the behaviour of reconstituted clays at small strains, Geotechnique 60, 751–763 (2010). https://doi.org/10.1680/geot.07.D.147 [Google Scholar]
  21. P. M. C. Lacey, Developments in the theory of particle mixing, J. Appl. Chem. 4, 257–268 (1954). https://doi.org/10.1002/jctb.5010040504 [Google Scholar]
  22. Y. Ma, H. Koochi, W. T. Sołowski, Simulation of Soil Mixing with Generalized Interpolation Material Point Method, in Proceedings of the IACMAG-2025 conference, Hong Kong, December 18–21 (2025), pp. 820–825. https://doi.org/10.1007/978-981-95-5969-5_116 [Google Scholar]
  23. S. S. Hsiau, M. L. Hunt, Shear-induced particle diffusion and longitudinal velocity fluctuations in a granular-flow mixing layer, J. Fluid Mech. 251, 299–313 (1993). https://doi.org/10.1017/S0022112093003428 [Google Scholar]
  24. Q. Li, S. Ma, X. Shen, M. Li, Z. Zou, Effects of impeller rotational speed and immersion depth on flow pattern, mixing and interface characteristics for kanbara reactors using vof-smm simulations, Metals 11, 1596 (2021). https://doi.org/10.3390/met11101596 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.