| Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00013 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/201912600013 | |
| Published online | 30 October 2019 | |
Design of a sprayer for complex treatment of tilled crops
FSBEI HE Kuban State Agrarian University named after I.T.Trubilin,
Krasnodar,
Russian Federation
* Corresponding author: sergey_belousov_87@mail.ru
The article is devoted to the complex processing of tilled crops by the proposed sprayer. The article has a research character which is expressed in the fact that there was shown the analysis of methods and means of chemical protection of plants as well as the analysis of the leading scientists on the subject, promising designs that provide optimal chemical treatment of tilled crops, their shortcomings and solutions to these problems were cited. There was defined the main tendency of development of machines for chemical protection of plants, improvement of their design according to modern requirements of agricultural development. Also, there was justified the design of the sprayer, namely, the results of scientific researches, there were shown the causal relationship of the number of spraying tips from the width and the grip of working area. There was described the principle and operation process of the developed sprayer. As a result of the work there was obtained the design for the complex processing of tilled crops. The conclusions present the main results achieved so far.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.