| Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00047 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/201912600047 | |
| Published online | 30 October 2019 | |
Possible ways of technogenic formations processing with zinc extraction from sulphide compounds
1
Federal State Budgetary Institution of Science Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences,
620016,
Ekaterinburg,
Amundsen st., 10,
Russia
2
Federal State Autonomous Educational Institution of Higher Education «Ural Federal University named after the first President of Russia B.N.Yeltsin»,
620002,
Ekaterinburg,
Mira st., 19,
Russia
* Corresponding author: silast@mail.ru
Extraction of zinc from sulphide forms by pyrometallurgical methods is difficult due to the high energy of the “zinc-sulfur” bond. Theoretically justified and experimentally confirmed the possible methods of extracting zinc from such compounds by changing of raw material phase composition. The zinc oxide obtained by this way has high purity and does not require additional purification by hydrochemical methods.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.