| Issue |
E3S Web Conf.
Volume 157, 2020
Key Trends in Transportation Innovation (KTTI-2019)
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 9 | |
| Section | Sustainable Transport and Eco-Friendly Fuels | |
| DOI | https://doi.org/10.1051/e3sconf/202015701017 | |
| Published online | 20 March 2020 | |
Modeling of a Mill for Processing a Turbine Blade
Southwest State University, 94, 50 let Oktyabrya Avenue, 305040 Kursk, Russia
* Corresponding author: yuliyamaximencko2010@yandex.ru
The aim of the study is to model the cutting edges, front and rear surfaces of the cutter with a constructive feed for machining a turbine blade. In the modeling process, we used the method of compiling mathematical models of technological processes for obtaining surfaces of parts using cutting. As a result, equations of the cutting edge of the mill, equations of the producing surface were obtained, parametric equations of the rear and front surfaces of the cutting teeth were constructed, and it was also proposed to introduce corrections to reduce the profile distortion after regrinding into the insertion motion parameter.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.