| Issue |
E3S Web Conf.
Volume 194, 2020
2020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|
|
|---|---|---|
| Article Number | 03017 | |
| Number of page(s) | 5 | |
| Section | Power Engineering and Power Generation Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202019403017 | |
| Published online | 15 October 2020 | |
Study on Design of Elastic Support for Wind Turbine
(CRRC ZHUZHOU INSTITUTE CO.,LTD., WIND POWER UNIT ZhuZhou, HuNan, 412001, China )
In this paper, the 2MW generator system is taken as an example. Firstly, the modal frequency of the system is obtained by theoretical calculation, FEA analysis and experimental test. The comparison of the three methods shows that the system frequency is calculated by using the mass point and rigid beam simplified generator model. It has a certain reliability, and greatly simplifies the selection of the elastic support of the wind turbine. Secondly, the DOE method is used to analyze the sensitivity of the wind turbine’s elastic support stiffness by the integration of ABAQUS and Isight software. Finally, the stiffness is optimized by algorithm. This is the first time that the method of designing the elastic support for wind turbine is deeply studied, which provides a scientific reference for the reasonable selection.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.