| Issue |
E3S Web Conf.
Volume 252, 2021
2021 International Conference on Power Grid System and Green Energy (PGSGE 2021)
|
|
|---|---|---|
| Article Number | 02078 | |
| Number of page(s) | 4 | |
| Section | Research and Development of Electrical Equipment and Energy Nuclear Power Devices | |
| DOI | https://doi.org/10.1051/e3sconf/202125202078 | |
| Published online | 23 April 2021 | |
The experimental investigation of the HPAM/phenolic resin deep profile system in fractured low-permeability reservoirs
1 Key Laboratory of Enhanced Oil Recovery (Northeast Petroleum University), Ministry of Education, Daqing 163318, China
2 Department of Petroleum Engineering, Northeast Petroleum University, Daqing 163318, China
Corresponding author’s E-mail: zhouwei111@petrochina.com.cn
The problem of injected water channeling along fractures exists in the process of water injection in fractured low permeability reservoir, aimed at this problem, deep profile control technology applies to plug fractures to improve the recovery of low permeability reservoir. In this paper, partially hydrolyzed polyacrylamide (HPAM) is used as water-plugging/profile-modifying agent and phenolic resin as crosslinker agent. Several profile control systems are tested to find the one which is suitable for fractured low permeability reservoirs. The performances of profile control systems are evaluated, and effects of formation water salinity, that of shearing rate and that of temperature on the performance are studied. Finally, in order to study effects of this profile control system on displacing oil, flowability experiment and core displacement experiment are applied. It shows that with the increase of salinty of prepared water and the increase of the shearing rate, the viscosity of this system decreases. With the increase of temperature, the gelling time shortens, the viscosity increases, but the stability weekens. This kind of profile control system has a good effect on plugging fractures of low permeability cores. After water flooding, this kind of profile control system is injected into cores, the recovery ratio can increase 3.5%. So the profile control system composed of HPAM/ phenolic resin can apply to deep profile control in fractured low permeability reservoir to enhance oil recovery.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.