| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 01019 | |
| Number of page(s) | 10 | |
| Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
| DOI | https://doi.org/10.1051/e3sconf/202126401019 | |
| Published online | 02 June 2021 | |
Modeling of the roller pressing of fibrous materials
Tashkent Institute of Architecture and Civil Engineering, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
The work is devoted to modeling the regularities of hydraulic pressure distribution and fluid removal from the fibrous material in the contact zone. It was found that the hydraulic pressure in the compression zone increases from zero at the initial point of contact to a maximum at the point of maximum compression of the fibrous material. The patterns of distribution of hydraulic pressure in the recovery zone depend on the length of the section, where the fluid moves from the layer of material to the elastic coatings. It was revealed that the amount of liquid removed at the beginning of the compression zone grows faster, then the growth rate is much lower, and at the end of the compression zone, the removed liquid is stabilized. The patterns of change in the removed fluid in the recovery zone depend on the angle, which determines the position of the point where the fluid changes direction.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.