| Issue |
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
|
|
|---|---|---|
| Article Number | 07012 | |
| Number of page(s) | 7 | |
| Section | Sustainable Materials and Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202128007012 | |
| Published online | 30 June 2021 | |
Influence of the size of hematite and magnetite ores on the parameters of the sintering process and the quality of the sinter
1 Kryvyi Rih National University, Ferrous metals metallurgy & foundry Department, 11 Vitalii Matusevysch Str., Kryvyi Rih, 50027, Ukraine
2 State University of Economic and Technology, Institute of Technology, Kryvyi Rih, 5 Stepana Tilhy Str., 50006, Ukraine
3 Satbayev University, Metallurgy and Mineral Processing Department, 22a Satpaev Str., Almaty, 050000, Kazahstan
Laboratory sintering of sinter charge based on hematite and magnetite iron ores of various sizes was carried out. The purpose of the study was to determine the effect of the type and size of the ore material on the gas permeability of the sintered layer, sintering performance and the need for fuel. The granulometric composition, cold strength, strength during recovery, and reducibility of the resulting agglomerate have been studied. Differences in the course of the process of agglomeration of hematite and magnetite ores at different sizes were revealed in the research. The established patterns have practical interest from the point of view of increasing the efficiency of the sintering process, improving the quality of the sinter and reducing the harmful impact on the environment.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.