Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
---|---|---|
Article Number | 01053 | |
Number of page(s) | 9 | |
Section | I Environmental Risks and Safety in Mechanical Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202337601053 | |
Published online | 31 March 2023 |
Filtration velocity under roller squeezing
Tashkent Institute of Architecture and Civil Engineering, 13, Navoi, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurranov59@mail.ru
Analytical dependencies are determined that describe the patterns of change in filtration rates in the squeezing area. It was established that the fluid filtration rate along the abscissa axis at the boundaries of the compression zone is zero, and inside the zone, it takes negative values. It was found that the fluid filtration rates along the ordinate axis are zero at the beginning of the compression zone; they increase to a maximum at a point lying on the line of centers, and in the zone of strain restoration, they depend on the angle that determines the position of the point where the fluid changes direction.
Key words: roll squeezing / moisture filtration / filtration speed / pressing area
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.