| Issue |
E3S Web of Conf.
Volume 382, 2023
8th International Conference on Unsaturated Soils (UNSAT 2023)
|
|
|---|---|---|
| Article Number | 23004 | |
| Number of page(s) | 6 | |
| Section | Geoenvironmental and Geo Energy Applications of Unsaturated Soil Mechanism - Part II | |
| DOI | https://doi.org/10.1051/e3sconf/202338223004 | |
| Published online | 24 April 2023 | |
Hygrothermal characterization of rammed earth according to humidity variations
LOCIE, Solar Academy, CNRS, Université Savoie Mont Blanc, 73000 Chambery, France
* Corresponding author: alessia.losini@univ-smb.fr
Rammed earth construction is built by compacting humid soil into formworks layer by layer, using clay fraction as only binder between the grains, without firing procedure. At this stage, the material is unsaturated, and capillary forces thus act to add cohesion between particles. Indeed, a peculiarity of this material is its high hygroscopic capacity, which allows water vapor to be absorbed and desorbed into the clay matrix. The variation of hydric state in the material leads to a variety of mechanical and thermal properties. Consequently, the complexity in studying this material is due to the strong dependence of many parameters on the moisture content and still few data are available in the literature on this subject for rammed earth materials. A soil used for an existing rammed earth building in Lyon is here characterized in order to determine its hygrothermal properties. Earth conductivity was firstly characterized in a reference dry state, then the influence of humidity variations was investigated. Sorption and desorption isotherms were determined to investigate the ability of the material to store and release humidity. Thermal conductivities were measured at different relative humidity, to put into evidence the influence of environmental conditions.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.