Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
---|---|---|
Article Number | 03028 | |
Number of page(s) | 7 | |
Section | Low Carbon Mobility and Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202345803028 | |
Published online | 07 December 2023 |
Geometric constraints system formation for helicopter construction
Moscow Aviation Institute (National Research University), 125993, Volokolamskoe shosse 4, Moscow, Russia
* Corresponding author: lamosov@yandex.ru
The paper presents a methodology of forming a system of geometric constraints in helicopter design. The methodology is based on the synthesis of the requirements in terms of ensuring operation on marine vessels, transportability, and capacity of the cargo (transport) cabin of the helicopter. The universality of this approach allows to adapt the formed system of geometrical constraints to helicopters of different purposes, both to newly developed and modernised helicopters. This methodology allows to define general geometrical characteristics of the helicopter, nomenclature of units requiring simplification of mounting and dismounting procedure of separate units and reduction of their inspection and maintenance periodicity, as well as configuration of helicopter ground and deck service facilities and recommended places of their installation.
Key words: helicopter / aircraft development / design / geometric constraints / transportability / unit layout
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.