E3S Web Conf.
Volume 14, 2017Energy and Fuels 2016
|Number of page(s)||10|
|Published online||15 March 2017|
The assessment of energy efficiency of electric machines for domestic appliances drive
Rzeszow University of Technology, The Faculty of Electrical and Computer Engineering, Rzeszow, Poland
* Corresponding author: email@example.com
In the paper, the division of domestic appliances into categories connected with input power was presented. The authors discussed issues connected with energy efficiency of these devices. An example of such a device power consumption of which affects considerably on overall power consumption from the mains is a vacuum cleaner. Vacuum cleaners are used in almost all households and they were covered by the EU regulations which introduced limitations in power consumption from the mains. In the paper, the assessment of energy efficiency of classic electric motors for vacuum cleaners drive was presented. Results of practical tests of chosen vacuum cleaners were presented. The digital power meter was used to measure electric parameters of tested vacuum cleaners and the PC was used to collect measuring data. The assessment of input power influence on energy consumption and energy efficiency was conducted based on tests results. It was shown in conclusions that the one of development directions of domestic appliances, which can cause improvement of energy efficiency, are alternative technologies of electric machines with much higher efficiency i.e. energy-saving electric machines with electronic commutation.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.