| Issue |
E3S Web Conf.
Volume 14, 2017
Energy and Fuels 2016
|
|
|---|---|---|
| Article Number | 02020 | |
| Number of page(s) | 10 | |
| Section | Fuels | |
| DOI | https://doi.org/10.1051/e3sconf/20171402020 | |
| Published online | 15 March 2017 | |
The influence of amount of copper of modified vermiculites on catalytic properties in SCR-NH3
Department of Fuels Technology, al. A. Mickiewicza 30, 30-059 Kraków, AGH University of Science and Technology
* Corresponding author: bsamo1@agh.edu.pl
Vermiculite was prepared by modifications with nitric acid, pillaring with Al oligocations and polymer (polyamide), impregnation with Cu. Obtained products were used as catalysts in SCR-NH3 process. All modifications increased catalytic performance compared to base vermiculite which was used as a reference. Sample pillared with polymer and impregnated with 5%wt. Cu showed best catalytic properties in the process, compared to other polymer and Cu modified samples.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.