| Issue |
E3S Web Conf.
Volume 108, 2019
Energy and Fuels 2018
|
|
|---|---|---|
| Article Number | 02019 | |
| Number of page(s) | 8 | |
| Section | Fuels | |
| DOI | https://doi.org/10.1051/e3sconf/201910802019 | |
| Published online | 05 July 2019 | |
The application of modified cenospheres in DeNOx process
AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland
* Corresponding author: Bogdan.Samojeden@agh.edu.pl
Cenospheres were modified with iron, manganese and/or copper ions by the hydrotalcite method. The obtained catalysts were characterized by FTIR, XRD and low-temperature nitrogen sorption. The best catalyst at low temperature (200 °C) was CBFe-Mn while at the highest measured temperature of 500 °C both CBFe-Mn and CBMn-Cu showed similar performance.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.