E3S Web Conf.
Volume 17, 20179th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2017
|Number of page(s)||7|
|Published online||24 May 2017|
Impact of damper opening time on work of storage matrix regenerative heat exchanger
Department of Air Conditioning, Heating, Natural Gas Engineering and Air Protection, Faculty of Environmental Engineering, Wroclaw University of Technology, Wyb. Wyspianskiego 27, 50-370 Wroclaw, Poland
* Corresponding author: email@example.com
Devices that by heat exchange take heat from exhaust air stream and transfer it to the external air stream in order to pre heat are called heat recovery heat exchangers. The heat exchange may take place through the wall (diaphragm) or using heat storage liquid (these devices are called recuperators) or by direct contact of exhaust and external air stream with the heat transfer surface - these devices are called regenerators. The publication presents the work characteristics of the storage matrix heat exchanger based on laboratory tests. In order to achieve the objectives the research station was designed and built.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.