Issue |
E3S Web Conf.
Volume 38, 2018
2018 4th International Conference on Energy Materials and Environment Engineering (ICEMEE 2018)
|
|
---|---|---|
Article Number | 01044 | |
Number of page(s) | 6 | |
Section | Environmental Science and Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/20183801044 | |
Published online | 04 June 2018 |
The Study of Sand-blocking Characteristic and Flow Field Simulation Analysis of the Ring-shaped Sand-barrier
China Agricultural University, Beijing 100083, China
* Corresponding author: liupingyi@cau.edu.cn
Aiming at the complexity of wind direction and irregular sand flow in a desert area, a combinatorial ring-shaped sand barrier is used. Stokes law of inertia force and centrifugal force and gravity sedimentation are used. With CFD fluid software Fluent, laminar flow model Equation and κ-ε turbulence model, the wind speed of the sand in the sand-gas-solid two-phase flow passing through the circular sand barrier is studied at different distances and different altitudes after the sand barrier, the wind speeds before and after the sand barrier are compared and analyzed . The mean minimum wind speed behind the single sand barrier was reduced by 32.5% -49.4% compared with that before the sand barrier. The wind speed at different height of the composite sand barrier was reduced by 30% -58.3% compared with the inlet wind speed, which solved the problem of irregular wind and sand control in the desert wind direction.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.