E3S Web Conf.
Volume 38, 20182018 4th International Conference on Energy Materials and Environment Engineering (ICEMEE 2018)
|Number of page(s)||5|
|Section||Water Conservancy and Civil Engineering|
|Published online||04 June 2018|
Development of Simulation Program for Temperature Field of Mass Concrete Structures
Xi’an University of Technology, Xi’an, Shanxi 710048, China
* Corresponding author: Email: email@example.com
Most existing temperature field calculation programs have relative defects. In the present paper, based on merits of ANSYS platform, a temperature field calculation program of mass concrete structure is developed and demonstrated. According to actual pouring progress and thermodynamic parameters, a roller-compacted concrete dam is simulated. The difference of maximum temperature between calculated and measured values of measuring points is less than 1.8°C. Furthermore, the relative difference is -5%–5%. This result shows that the calculation program developed based on ANSYS platform can simulate and calculate the temperature field of mass concrete structure.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.