E3S Web of Conferences
Volume 44, 201810th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|Number of page(s)||8|
|Published online||03 July 2018|
Energy performance for residential building – comparison between theoretical method and real measurements
Poznan University of Technology, Faculty of Civil and Environmental Engineering, Institute of Environmental Engineering, 4 Berdychowo St., 60-965 Poznan, Poland
2 TKT Engineering, 6 Karpia St., 61-619 Poznan, Poland
* Corresponding author: email@example.com
This paper presents an energy performance of residential building (two – family building) located in Poznan. Both apartments were analysed separately. By using a method of energy performance calculations valid in Poland, a theoretical energy performance had been prepared. The calculations were conducted assuming real changeability of climatic data in years: 2010–2017. The real energy performance was prepared based on actual gas consumption for the purpose of heating and domestic hot water preparation (DHW) within the years of measurements taken, being a subject of analysis. The findings from this study revealed that a theoretical energy performance significantly deviates from the results obtained by means of energy consumption measurements, which resulted from variability of basic climatic data over time and also from theoretical usage profile of the apartments.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.