E3S Web Conf.
Volume 44, 201810th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|Number of page(s)||8|
|Published online||03 July 2018|
The study on decreasing of nitrogen oxides emission carried out on DKVR 10-13 industrial heating boilers
Koszalin University of Technology, Faculty of Civil Engineering, Environmental and Geodetic Sciences, Sniadeckich 2, 75-452 Koszalin, Poland
2 Saint Petersburg State University of Architecture and Civil Engineering, 2-nd Krasnoarmeiskaya St. 4, 190005 St. Petersburg, Russia
* Corresponding author: email@example.com
Nitrogen oxides are considered to be much more toxic than, for example, carbon monoxide. For this reason, the Authors developed and implemented a method for decrease of NOX emission into the atmosphere from DKVR 10-13 boilers. As an effective method for boilers propose injection of steam into the combustion zone. After series of experimental studies an optimal design of the head for steam injection was developed, according to the proprietary technology. The injector head was kept unchanged while the spraying end caps were modified (Fig. 2). Three levels of possible impact of emissions from boiler on the atmosphere pollution were taken into account during studies. After the analysis, it was assumed that the level of the real maximum emission should be taken as the reference level in relation to which the decrease of NOX emission should be determined. The results obtained by the Authors calculated into mass emission and as objective values of nitrogen oxides concentration calculated into α = 1 (Figures 3 and 4). Realization of the study plan, assumed by the Authors, allowed to determine the optimal parameters of the NOx emission decrease method, assuming the expected 30% level of emission decrease at a limited consumption of injected.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.