| Issue |
E3S Web Conf.
Volume 53, 2018
2018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|
|
|---|---|---|
| Article Number | 01037 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering, Materials and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/20185301037 | |
| Published online | 14 September 2018 | |
Study on defects detection technique of precise optical element
1
Mechanical Engineering Department, Chongqing University of Technology, 400054, China
2
Electrical Engineering Department, Chongqing University of Technology, 400054, China
3
Teaching quality monitoring and Evaluation Center, Chongqing University of Technology, 400054, China
* Corresponding author: lomoer@cqut.edu.cn
Aiming at the problems of low efficiency of traditional detection methods for surface defects of precision optical element and inconvenient detection for optical elements of different calibers, a adjustable optical element defects detecting device for large laser devices is designed. The key technical points of system composition, detection environment, illumination design and image stitching are expounded. According to the characteristics of surface defects of optical element, such as the difference of contour, gray scale, contrast and ambiguity, a classification method based on FCM is proposed. The experimental results show that the system can realize the automatic detection of surface defects, also it can effectively distinguishes micron-scale defects and has good defect recognition performance. The overall average recognition rate reached to 93.3%.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.