E3S Web Conf.
Volume 55, 2018XXIIIrd Autumn School of Geodesy
|Number of page(s)||5|
|Published online||21 September 2018|
Proposition of determination of displacements using the TDRA 6000 laser station
University of Science and Technology, Faculty of Civil and Environmental Engineering and Architecture, 7 prof. S. Kaliski St., 85-796 Bydgoszcz, Poland
2 University of Zielona Góra, Institute of Building Engineering, Department of Land and Environment Engineering, 9 Licealna St., 65-417 Zielona Góra, Poland
* Corresponding author: firstname.lastname@example.org
With modern measurement technologies, it is possible to achieve higher precision and solve complex measurement tasks. The tested device (TDRA 6000 laser station) features a direct drive technology ensuring a 3D point accuracy of 0.25 mm. TDRA 6000 combined with proper software is a perfect tool to monitor engineering objects. The article presents the measurement technique and the method of calculation of 3D displacements of control and measurement networks using the TDRA 6000 laser station from Leica. The values presented herein derive from periodic measurements carried out in control points stabilised at a ground the above-ground crossing between buildings located on the premises of the University of Science and Technology campus in Bydgoszcz.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.