Issue |
E3S Web Conf.
Volume 60, 2018
Ukrainian School of Mining Engineering
|
|
---|---|---|
Article Number | 00021 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/20186000021 | |
Published online | 16 October 2018 |
Investigation of muck drawing in blocks with trapezoid sills
Kryvyi Rih National University, Department of Underground Mining of Mineral Deposit, 11 Matusevycha Ave., 50027 Kryvyi Rih, Ukraine
* Corresponding author: mstupnik2012@gmail.com
The article is aimed at determining regularities of muck drawing in blocks and developing the technology of enhancing of muck ore parameters through shaping a trapezoid block sill. To confirm the suggested assumptions, study regularities of forming and determine contours of crests after full muck drawing from the second stage blocks, laboratory experiments have been conducted on drawing muck ore on the boundary with solidifying backfill massif of I stage stopes. For the first time there have been determined numerical dependencies of ore losses in crests on the contact with the solidifying backfill massif of the I stage stopes after ore drawing from the II stage blocks on the dead stope height and dips of side surfaces of trapezoid basis of sill pillars when forming the trapezoid sill with inclined side surfaces of the lower part of the I stage stopes. There are developed methods of calculating ore losses in crests on the contact with the solidifying backfill massif of I stage stopes after muck drawing from the II stage blocks. There are proposed methods of determining optimal parameters of mining ore deposits considering minimization of re losses in crests and increase of muck extraction from II stage blocks.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.